40x1 Female Berg Strip

Buy Now on Stufin

Component Name

Overview

The 40x1 Female Berg Strip is a type of electrical connector used in various Internet of Things (IoT) and electronic projects. It is a versatile and widely used component that provides a reliable and compact way to connect and disconnect devices, sensors, or modules in a circuit.

Functionality

The primary function of the 40x1 Female Berg Strip is to act as a connector that allows the user to easily connect and disconnect wires, cables, or other components to a PCB (Printed Circuit Board) or a breadboard. It provides a secure and reliable connection, ensuring minimal signal loss and electrical noise.

Key Features

Number of Pins: The 40x1 Female Berg Strip has 40 pins, arranged in a single row, allowing it to connect to a wide range of devices and modules.
Pin Spacing: The pins are spaced 1.00 mm apart, making it compatible with standard breadboards and PCBs.
Gender: The component is a female connector, meaning it has receptacles that accept male pins or wires.
Insulation: The connector has a plastic insulation body that provides electrical isolation and protection from short circuits.
Contact Material: The pins are typically made of a copper alloy, ensuring good electrical conductivity and durability.
Operating Temperature: The component can operate in a wide temperature range, typically from -20C to +80C.
Current Rating: The 40x1 Female Berg Strip can handle a maximum current rating of 1A per pin, making it suitable for low-to-medium power applications.
Mounting: The component can be mounted on a PCB or breadboard using the provided pins, or it can be used as a standalone connector.

Applications

Sensor Integration: Connecting sensors, such as temperature, humidity, or pressure sensors, to microcontrollers or data acquisition systems.
Module Connection: Interfacing modules, such as Wi-Fi, Bluetooth, or GPS modules, to a microcontroller or a development board.
Prototyping: Building prototypes on breadboards or PCBs, where the 40x1 Female Berg Strip provides a convenient way to connect and test components.
Robotics and Automation: Connecting actuators, motors, or other devices to a control board or microcontroller.

The 40x1 Female Berg Strip is commonly used in various IoT and electronic projects, including

Package and Dimensions

The 40x1 Female Berg Strip is typically packaged in a rectangular shape, with dimensions depending on the manufacturer and specific product. However, a standard package size is approximately

Length

40 mm

Width

10 mm

Height

5 mm

Conclusion

The 40x1 Female Berg Strip is a versatile and widely used component in IoT and electronic projects. Its compact size, reliable connection, and ease of use make it an ideal choice for a variety of applications. By understanding its functionality and key features, users can effectively integrate the 40x1 Female Berg Strip into their designs and projects.

Pin Configuration

40x1 Female Berg Strip Documentation
Overview
The 40x1 Female Berg Strip is a common interconnect component used in electronic circuits to connect devices, modules, or boards. It consists of 40 female pins, spaced 1 mm apart, and is designed to mate with a 40x1 Male Berg Strip or other compatible connectors.
Pin Description
The 40x1 Female Berg Strip has 40 pins, divided into two rows of 20 pins each. Each pin is labeled with a number, starting from 1 on the top-left corner and increasing sequentially. Here's a detailed description of each pin:
Row 1 (Pins 1-20)
Pin 1: Optional ( vacant or NC - No Connection)
Pin 2: GND (Ground)
Pin 3: VCC (Power supply voltage, typically 3.3V or 5V)
Pin 4: Digital I/O or Signal (dependent on the connected device or module)
Pin 5: Digital I/O or Signal (dependent on the connected device or module)
...
Pin 19: Digital I/O or Signal (dependent on the connected device or module)
Pin 20: GND (Ground)
Row 2 (Pins 21-40)
Pin 21: Optional (vacant or NC - No Connection)
Pin 22: Digital I/O or Signal (dependent on the connected device or module)
Pin 23: Digital I/O or Signal (dependent on the connected device or module)
Pin 24: Digital I/O or Signal (dependent on the connected device or module)
...
Pin 38: Digital I/O or Signal (dependent on the connected device or module)
Pin 39: VCC (Power supply voltage, typically 3.3V or 5V)
Pin 40: GND (Ground)
Connection Structure
When connecting devices or modules to the 40x1 Female Berg Strip, follow these guidelines:
1. Power Pins:
Connect VCC (Pin 3 and Pin 39) to the power supply voltage (3.3V or 5V) of your circuit.
Connect GND (Pin 2, Pin 20, and Pin 40) to the ground of your circuit.
2. Digital I/O or Signal Pins:
Connect the digital I/O or signal pins (Pins 4-19 and Pins 22-38) to the corresponding pins on the connected device or module.
Ensure the signal names and pin numbers match between the connected devices or modules.
3. Optional Pins:
Leave Pin 1 and Pin 21 unconnected if not required.
If required, connect Pin 1 and Pin 21 according to the specifications of the connected device or module.
Important Notes
Always check the datasheet or documentation of the connected device or module to ensure correct pin assignments and connections.
Use a suitable cable or wire to connect the 40x1 Female Berg Strip to the corresponding male connector or device.
Handle the connector with care to avoid damage or bent pins.
By following this documentation, you should be able to properly connect and utilize the 40x1 Female Berg Strip in your IoT projects.

Code Examples

40x1 Female Berg Strip Documentation

The 40x1 Female Berg Strip is a type of connector commonly used in electronics and IoT projects to connect peripherals, sensors, and modules to a microcontroller or other electronic devices. This documentation provides a comprehensive overview of the component, its features, and code examples to demonstrate its usage in various contexts.

Features and Specifications

40-pin female connector with 1-row configuration
 Pitch: 2.54mm (0.1 inch)
 Compatible with breadboards, PCBs, and other electronic circuits
 Can be used with male berg strips, jumper wires, and other compatible connectors

Code Examples

Example 1: Connecting an Arduino Uno to a Breadboard using a 40x1 Female Berg Strip

In this example, we will connect an Arduino Uno board to a breadboard using a 40x1 Female Berg Strip. We will use the strip to connect the Uno's digital pins to an LED circuit on the breadboard.

Hardware Requirements:

Arduino Uno board
 40x1 Female Berg Strip
 Breadboard
 LED
 1 k resistor
 Jumper wires

Code:
```c
const int ledPin = 13;  // Choose a digital pin on the Arduino Uno

void setup() {
  pinMode(ledPin, OUTPUT);
}

void loop() {
  digitalWrite(ledPin, HIGH);
  delay(1000);
  digitalWrite(ledPin, LOW);
  delay(1000);
}
```
Connections:

Connect the 40x1 Female Berg Strip to the Arduino Uno's digital pins (e.g., D0-D13).
 Connect the LED circuit on the breadboard to the corresponding pins on the berg strip (e.g., D13).

Example 2: Connecting a Sensor Module to a Raspberry Pi using a 40x1 Female Berg Strip

In this example, we will connect a temperature sensor module to a Raspberry Pi using a 40x1 Female Berg Strip. We will use the strip to connect the sensor's VCC, GND, and data pins to the Raspberry Pi's GPIO pins.

Hardware Requirements:

Raspberry Pi board
 40x1 Female Berg Strip
 Temperature sensor module (e.g., DS18B20)
 Jumper wires

Code:
```python
import RPi.GPIO as GPIO
import time

GPIO.setmode(GPIO.BCM)

temp_pin = 4  # Choose a GPIO pin on the Raspberry Pi

while True:
    temp_sensor = GPIO.input(temp_pin)
    if temp_sensor:
        print("Temperature: ", get_temperature())  # Replace with actual temperature reading code
    time.sleep(1)
```
Connections:

Connect the 40x1 Female Berg Strip to the Raspberry Pi's GPIO pins (e.g., GPIO 4).
 Connect the temperature sensor module's VCC, GND, and data pins to the corresponding pins on the berg strip.

These examples demonstrate the versatility of the 40x1 Female Berg Strip in connecting various electronic components and modules to microcontrollers and single-board computers.