Transparent Pipe/Tube for DC Waterpump - 1 Meter

Buy Now on Stufin

Component Name

Description

The Transparent Pipe/Tube for DC Waterpump is a 1-meter long, clear tubing designed specifically for use with DC water pumps in a variety of applications, including IoT-based projects, DIY ventures, and industrial settings. This component is an essential element in liquid management systems, allowing for the efficient and reliable transportation of fluids.

Functionality

The primary function of the Transparent Pipe/Tube is to convey water or other liquids from the DC water pump to the desired location, while providing a clear visual inspection of the fluid flow. This component is designed to withstand the pressure and flow rates generated by DC water pumps, ensuring a leak-free and reliable operation.

Key Features

Material: The pipe/tube is made from a high-quality, transparent, and flexible material that resists corrosion and degradation from water and other liquids.
Length and diameter: The component measures 1 meter in length, with an inner diameter of [insert diameter] and an outer diameter of [insert diameter].
Working Pressure: The pipe/tube is designed to withstand a maximum working pressure of [insert pressure rating] bar, making it suitable for use with DC water pumps.
Transparency: The clear tubing allows for easy visual inspection of the fluid flow, enabling users to monitor the system's performance and detect any potential issues.
Chemical Resistance: The material used is resistant to a wide range of chemicals, including chlorine, acids, and alkaline solutions, ensuring compatibility with various fluid types.
Kink and Crush Resistance: The pipe/tube is designed to resist kinking and crushing, ensuring a smooth and uninterrupted fluid flow.
Connectivity: The component features standard-sized connections at both ends, allowing for easy connection to DC water pumps, valves, and other liquid management system components.
Temperature Range: The pipe/tube can operate within a temperature range of [insert temperature range], making it suitable for use in a variety of applications.

Applications

The Transparent Pipe/Tube for DC Waterpump is suitable for use in a wide range of applications, including

IoT-based projects

DIY ventures

Industrial liquid management systems

Aquariums and fish tanks

Cooling systems

Water purification systems

Technical Specifications

| Specification | Value |

| --- | --- |

| Material | Transparent, flexible material |

| Length | 1 meter |

| Inner Diameter | [Insert diameter] |

| Outer Diameter | [Insert diameter] |

| Working Pressure | [Insert pressure rating] bar |

| Temperature Range | [Insert temperature range] |

| Chemical Resistance | Resistant to chlorine, acids, and alkaline solutions |

| Kink and Crush Resistance | Yes |

| Connectivity | Standard-sized connections at both ends |

Note

The specifications may vary depending on the manufacturer and specific product. Please consult the product datasheet or manufacturer's documentation for precise details.

Pin Configuration

Transparent Pipe/Tube for DC Waterpump - 1 Meter Documentation
Overview
The Transparent Pipe/Tube for DC Waterpump is a 1-meter long, transparent tubing designed for use with DC water pumps in various IoT applications. This documentation provides a detailed explanation of the pipe's connections and how to properly connect them.
Pinout and Connection Guide
The Transparent Pipe/Tube has two ends, each with a specific function and connection points. Below is a point-by-point explanation of each pin and how to connect them:
End 1: DC Waterpump Connection
Inlet (Input) Pin:
+ Function: Connects to the DC waterpump's outlet to receive water flow.
+ Description: The inlet pin is the female thread connection on one end of the pipe, designed to mate with the male thread outlet of a DC waterpump.
+ Connection: Screw the female thread of the inlet pin onto the male thread of the DC waterpump's outlet, ensuring a secure and watertight connection.
End 2: Output Connection
Outlet (Output) Pin:
+ Function: Directs water flow from the DC waterpump to the desired destination (e.g., a water tank, irrigation system, or other IoT devices).
+ Description: The outlet pin is the male thread connection on the other end of the pipe, designed to connect to a female thread adapter or fitting.
+ Connection: Attach a female thread adapter or fitting to the outlet pin, ensuring a secure and watertight connection. Then, connect the adapter or fitting to the desired destination.
Additional Considerations
When connecting the pipe to the DC waterpump and output destination, ensure that all threads are clean and free of debris to maintain a watertight seal.
Apply a small amount of thread sealant (e.g., Teflon tape) to the threads of the inlet and outlet pins to enhance the seal and prevent leaks.
Make sure to follow the manufacturer's instructions for the DC waterpump and any additional components in your IoT system to ensure proper installation and operation.
By following these connection guidelines, you can successfully integrate the Transparent Pipe/Tube for DC Waterpump into your IoT project.

Code Examples

Transparent Pipe/Tube for DC Waterpump - 1 Meter Documentation

The Transparent Pipe/Tube for DC Waterpump - 1 Meter is a flexible, clear tubing designed for use with DC water pumps in IoT projects. This documentation provides an overview of the component's specifications, features, and code examples to demonstrate its usage in various contexts.

Specifications:

Material: Flexible PVC
 Length: 1 meter
 Inner Diameter: 6mm
 Outer Diameter: 8mm
 Operating Temperature: -20C to 80C
 Working Pressure: Up to 1.5 bar
 Compatibility: Suitable for use with DC water pumps

Features:

Transparent tubing allows for easy monitoring of fluid flow
 Flexible and kink-resistant design for easy installation
 Chemical-resistant material ensures durability in various fluid applications

Code Examples:

### Example 1: Basic Water Pump Control using Arduino

This example demonstrates how to use the Transparent Pipe/Tube for DC Waterpump - 1 Meter with an Arduino board to control a DC water pump.

Hardware Requirements:

Arduino Board (e.g., Arduino Uno)
 DC Water Pump (compatible with the transparent pipe/tube)
 Transparent Pipe/Tube for DC Waterpump - 1 Meter
 Power Supply (for the water pump)

Code:
```c
const int pumpPin = 9;  // Pin for the water pump

void setup() {
  pinMode(pumpPin, OUTPUT);
}

void loop() {
  // Turn the water pump on for 5 seconds
  digitalWrite(pumpPin, HIGH);
  delay(5000);

// Turn the water pump off for 5 seconds
  digitalWrite(pumpPin, LOW);
  delay(5000);
}
```
In this example, the Arduino board controls the DC water pump, which is connected to the transparent pipe/tube. The pipe/tube allows for easy monitoring of the fluid flow.

### Example 2: IoT-Based Automated Watering System using Raspberry Pi

This example demonstrates how to use the Transparent Pipe/Tube for DC Waterpump - 1 Meter with a Raspberry Pi board to create an IoT-based automated watering system.

Hardware Requirements:

Raspberry Pi Board (e.g., Raspberry Pi 4)
 DC Water Pump (compatible with the transparent pipe/tube)
 Transparent Pipe/Tube for DC Waterpump - 1 Meter
 Moisture Sensor (e.g., YL-69 Soil Moisture Sensor)
 Wi-Fi Module (e.g., Raspberry Pi Wi-Fi Adapter)

Code:
```python
import RPi.GPIO as GPIO
import time
import requests

GPIO.setmode(GPIO.BCM)
pump_pin = 17  # Pin for the water pump
moisture_pin = 23  # Pin for the moisture sensor

GPIO.setup(pump_pin, GPIO.OUT)
GPIO.setup(moisture_pin, GPIO.IN)

while True:
    moisture_level = GPIO.input(moisture_pin)
    if moisture_level < 500:  # Adjust the threshold value based on your soil type
        print("Soil is dry. Watering...")
        GPIO.output(pump_pin, GPIO.HIGH)
        time.sleep(30)  # Water for 30 seconds
        GPIO.output(pump_pin, GPIO.LOW)
    else:
        print("Soil is moist. No watering needed.")
    time.sleep(60)  # Check the moisture level every 60 seconds

# Send a notification to your IoT dashboard or cloud platform
    requests.post("https://your-iot-dashboard.com/watering-system", json={"status": "watered"})
```
In this example, the Raspberry Pi board reads the moisture level from the soil using a moisture sensor. If the soil is dry, the board turns on the DC water pump, which is connected to the transparent pipe/tube. The pipe/tube allows for easy monitoring of the fluid flow, and the system sends a notification to your IoT dashboard or cloud platform.

Note: These code examples are for illustrative purposes only and may require modifications to work with your specific hardware and IoT platform.