220F 25V Electrolytic Capacitor (Pack of 5)

Buy Now on Stufin

Component Documentation

Overview

The 220F 25V Electrolytic Capacitor is a type of polarized capacitor designed for use in electronic circuits. This component is part of a pack of 5, providing a convenient and cost-effective solution for various IoT projects and applications.

Functionality

The primary function of this electrolytic capacitor is to store electric energy and filter out unwanted AC ripples in a circuit. It is commonly used in power supplies, audio equipment, and other electronic devices that require a stable DC voltage. The capacitor's electrolytic construction allows it to provide a high capacitance value in a relatively small physical package.

Key Features

Capacitance Value: 220 microfarads (F)

The capacitor has a capacitance value of 220F, making it suitable for applications that require a moderate level of energy storage and filtering.

Voltage Rating: 25 Volts (V)

The capacitor has a maximum voltage rating of 25V, which means it can safely handle voltages up to 25V without experiencing electrical breakdown or damage.

Polarity: Polarized

This capacitor is polarized, meaning it has a positive and negative terminal. Incorrect polarity connection can result in damage to the capacitor or the surrounding circuit.

Physical Characteristics:

Package Type

Radial lead through-hole

Dimensions

varies depending on the specific component (check datasheet for exact dimensions)

Weight

typically around 1-2 grams

Tolerance: 20%

The capacitance value of the capacitor has a tolerance of 20%, which means the actual capacitance value may vary by up to 20% from the stated value of 220F.

Operating Temperature: -40C to 85C

The capacitor is designed to operate within a temperature range of -40C to 85C, making it suitable for most IoT applications.

Packaging: Pack of 5

This component is sold in a pack of 5, providing a convenient and cost-effective solution for IoT projects and applications.

Applications

The 220F 25V Electrolytic Capacitor is suitable for a wide range of IoT applications, including

Power supply filtering and regulation

Audio equipment and audio signal processing

Motor control and driver circuits

General-purpose DC voltage stabilization

IoT devices and embedded systems

Precautions and Handling

When handling and using this capacitor, please observe the following precautions

Ensure correct polarity connection to avoid damage to the capacitor or surrounding circuit.

Avoid exceeding the maximum voltage rating of 25V.

Handle the capacitor with care to avoid physical damage or mechanical stress.

Store the capacitor in a cool, dry place away from direct sunlight.

Datasheet and Manufacturer Information

For detailed specifications, dimensions, and manufacturer information, please refer to the datasheet provided by the manufacturer or supplier.

Pin Configuration

220F 25V Electrolytic Capacitor (Pack of 5) - Pinout and Connection Guide
Overview
The 220F 25V Electrolytic Capacitor is a polarized capacitor commonly used in electronic circuits for filtering, decoupling, and energy storage applications. This component has two pins, which are explained in detail below.
Pinout
The capacitor has two pins, namely:
Positive Leg (Anode)
Negative Leg (Cathode)
Pin Description
### 1. Positive Leg (Anode)
Pin Name: +
Pin Function: The positive leg of the capacitor is connected to the positive voltage supply or the higher voltage side of the circuit.
Connection: Connect this pin to the positive voltage supply, such as VCC or Vin, or to the higher voltage side of the circuit.
### 2. Negative Leg (Cathode)
Pin Name: -
Pin Function: The negative leg of the capacitor is connected to the negative voltage supply or the lower voltage side of the circuit.
Connection: Connect this pin to the negative voltage supply, such as GND or VSS, or to the lower voltage side of the circuit.
Connection Structure
To connect the capacitor correctly, follow these steps:
Identify the positive leg (anode) and negative leg (cathode) of the capacitor. The positive leg is usually marked with a "+" sign or a longer lead.
Connect the positive leg (+) to the positive voltage supply or the higher voltage side of the circuit.
Connect the negative leg (-) to the negative voltage supply or the lower voltage side of the circuit.
Ensure that the capacitor is connected with the correct polarity, as electrolytic capacitors can be damaged or even explode if connected with reverse polarity.
Important Notes
Always observe the capacitor's voltage rating (25V in this case) and ensure that the voltage applied to the capacitor does not exceed this rating.
Follow proper safety precautions when handling capacitors, as they can store electrical energy even when disconnected from the circuit.
Use the capacitor in a well-ventilated area, away from flammable materials, and avoid overheating the component.
By following these guidelines, you can safely and correctly connect the 220F 25V Electrolytic Capacitor in your electronic circuit.

Code Examples

Component Documentation: 220F 25V Electrolytic Capacitor (Pack of 5)

Overview

The 220F 25V Electrolytic Capacitor is a type of polarized capacitor commonly used in electronic circuits for filtering, decoupling, and energy storage applications. This pack of 5 capacitors is suitable for a wide range of IoT projects, offering a reliable and cost-effective solution for various applications.

Key Specifications

Capacitance: 220 F
 Voltage Rating: 25 V
 Tolerance: 20%
 Operating Temperature: -40C to +85C
 Capacitor Type: Electrolytic
 Package: Radial lead, 5 pieces per pack

Usage and Applications

Filtering: Use as a low-pass filter to remove high-frequency noise and ripple from a DC power supply.
 Decoupling: Place between the power supply and a microcontroller or other sensitive component to reduce voltage fluctuations.
 Energy Storage: Use as a temporary energy storage device in power backup or pulse applications.

Code Examples

### Example 1: Simple Power Supply Filtering (Arduino)

In this example, we'll use the 220F 25V Electrolytic Capacitor to filter out noise and ripple from a DC power supply connected to an Arduino board.
```c
// Define power supply pins
const int VCC_PIN = 5;  // 5V power supply
const int GND_PIN = 0;  // Ground

void setup() {
  // Connect capacitor between power supply and ground
  pinMode(VCC_PIN, OUTPUT);
  pinMode(GND_PIN, OUTPUT);
  digitalWrite(VCC_PIN, HIGH);
  digitalWrite(GND_PIN, LOW);

// Add capacitor to filter out noise and ripple
  delay(10);  // Allow capacitor to charge
}

void loop() {
  // Your code here...
}
```
### Example 2: Decoupling Capacitor for Microcontroller (Raspberry Pi)

In this example, we'll use the 220F 25V Electrolytic Capacitor as a decoupling capacitor between the power supply and a Raspberry Pi microcontroller.
```python
import RPi.GPIO as GPIO

# Set up GPIO mode
GPIO.setmode(GPIO.BCM)

# Define power supply pins
VCC_PIN = 17  # 3.3V power supply
GND_PIN = 25  # Ground

# Connect capacitor between power supply and ground
GPIO.setup(VCC_PIN, GPIO.OUT)
GPIO.setup(GND_PIN, GPIO.OUT)
GPIO.output(VCC_PIN, GPIO.HIGH)
GPIO.output(GND_PIN, GPIO.LOW)

# Add capacitor to decouple power supply
print("Decoupling capacitor connected.")
```
Remember to always follow proper safety precautions when working with electronic circuits, and consult the datasheet for specific usage guidelines and precautions when handling electrolytic capacitors.