Trapezoidal Screw 500mm rod with Copper Nut
Trapezoidal Screw 500mm rod with Copper Nut
The Trapezoidal Screw 500mm rod with Copper Nut is a linear motion component designed for use in various Internet of Things (IoT) applications, robotics, and automation systems. This component combines a trapezoidal screw rod with a copper nut, providing a reliable and efficient linear motion solution.
The Trapezoidal Screw 500mm rod with Copper Nut is designed to convert rotary motion into linear motion. The trapezoidal screw rod is mounted to a motor or other rotary drive source, and as the motor rotates, the copper nut moves along the screw rod, providing precise linear motion. This motion can be used to actuate various mechanisms, such as valves, pumps, or other devices, in IoT applications.
500mm
Copper or copper alloy
Trapezoidal
[Insert thread pitch]
[Insert thread diameter]
[Insert diameter]
[Insert length]
Up to 500mm (dependent on application)
Up to [Insert maximum linear speed]
Up to [Insert maximum acceleration]
[Insert maximum static load]
[Insert maximum dynamic load]
The trapezoidal screw rod can be mounted to a motor or other rotary drive source using a variety of methods, including couplings, belts, or gearboxes.
The copper nut is designed to be mounted to a moving component or mechanism.
-20C to 80C (-4F to 176F)
-30C to 100C (-22F to 212F)
Up to 80% RH (non-condensing)
| The Trapezoidal Screw 500mm rod with Copper Nut is suitable for a wide range of IoT applications, including |
| The Trapezoidal Screw 500mm rod with Copper Nut complies with relevant industry standards and regulations, including |
The Trapezoidal Screw 500mm rod with Copper Nut is backed by a [insert warranty period]-year warranty. Technical support and documentation are available through our website and dedicated support team.
Trapezoidal Screw 500mm Rod with Copper Nut DocumentationOverviewThe Trapezoidal Screw 500mm Rod with Copper Nut is a high-quality linear motion component designed for precise and reliable movement in various IoT applications. This component consists of a 500mm long trapezoidal screw rod made of durable steel, paired with a copper nut that ensures smooth and consistent movement.Technical SpecificationsScrew Rod Material: Steel
Screw Rod Length: 500mm
Screw Rod Type: Trapezoidal
Nut Material: Copper
Thread Pitch: 2mm
Thread Type: Trapezoidal
Maximum Load Capacity: 50kg
Operating Temperature: -20C to 80CCode Examples### Example 1: Arduino Linear Actuator ControlThis example demonstrates how to use the Trapezoidal Screw 500mm Rod with Copper Nut as a linear actuator in an Arduino-based project.
```cpp
const int stepsPerRevolution = 200; // Steps per revolution for your stepper motor
const int stepsPerMillimeter = 10; // Steps per millimeter for your trapezoidal screw// Define the stepper motor pins
const int stepPin = 2;
const int dirPin = 3;void setup() {
pinMode(stepPin, OUTPUT);
pinMode(dirPin, OUTPUT);
}void loop() {
// Move the linear actuator 100mm forward
digitalWrite(dirPin, HIGH);
for (int i = 0; i < 100 stepsPerMillimeter; i++) {
digitalWrite(stepPin, HIGH);
delay(1);
digitalWrite(stepPin, LOW);
delay(1);
}// Hold the position for 1 second
delay(1000);// Move the linear actuator 50mm backward
digitalWrite(dirPin, LOW);
for (int i = 0; i < 50 stepsPerMillimeter; i++) {
digitalWrite(stepPin, HIGH);
delay(1);
digitalWrite(stepPin, LOW);
delay(1);
}
}
```
### Example 2: Python Script for Linear Motion Control using Raspberry PiThis example shows how to control the Trapezoidal Screw 500mm Rod with Copper Nut using a Raspberry Pi and Python.
```python
import RPi.GPIO as GPIO
import time# Set up GPIO pins for stepper motor control
GPIO.setmode(GPIO.BCM)
step_pin = 17
dir_pin = 23
GPIO.setup(step_pin, GPIO.OUT)
GPIO.setup(dir_pin, GPIO.OUT)# Define the stepper motor settings
steps_per_revolution = 200
steps_per_millimeter = 10def move_linear_actuator(millimeters, direction):
if direction == "forward":
GPIO.output(dir_pin, GPIO.HIGH)
elif direction == "backward":
GPIO.output(dir_pin, GPIO.LOW)
for i in range(millimeters steps_per_millimeter):
GPIO.output(step_pin, GPIO.HIGH)
time.sleep(0.01)
GPIO.output(step_pin, GPIO.LOW)
time.sleep(0.01)# Move the linear actuator 200mm forward
move_linear_actuator(200, "forward")# Hold the position for 2 seconds
time.sleep(2)# Move the linear actuator 100mm backward
move_linear_actuator(100, "backward")
```
These code examples demonstrate how to control the Trapezoidal Screw 500mm Rod with Copper Nut in various contexts, including Arduino and Raspberry Pi-based projects. By integrating this component with your IoT project, you can achieve precise and reliable linear motion for a wide range of applications.