25W Ceramic Coated Needle Delux Long Life Bit For Soldron 25w Soldering Iron - CB25N3

Component Documentation: 25W Ceramic Coated Needle Delux Long Life Bit For Soldron 25w Soldering Iron - CB25N3

Overview

The CB25N3 is a 25W ceramic coated needle delux long life bit designed for use with the Soldron 25W soldering iron. This bit is ideal for precision soldering applications, offering a long lifespan and consistent performance.

Key Features

25W power rating
 Ceramic coated needle for improved durability and heat resistance
 Delux long life design for extended usage
 Compatible with Soldron 25W soldering iron

Technical Specifications

Material: Ceramic coated steel
 Tip style: Needle
 Power rating: 25W
 Temperature range: 200C - 450C
 Dimensions: [Insert dimensions]

Example Code and Usage

The following code examples demonstrate how to use the CB25N3 bit in various contexts:

Example 1: Basic Soldering Application (Arduino)

In this example, we'll use the CB25N3 bit with an Arduino board to solder a simple LED circuit.

Hardware Requirements:

Arduino board
 Soldron 25W soldering iron with CB25N3 bit
 LED
 Resistors
 Breadboard

Software Requirements:

Arduino IDE

Code:
```c++
void setup() {
  // Initialize the LED pin as an output
  pinMode(LED_PIN, OUTPUT);
}

void loop() {
  // Turn the LED on
  digitalWrite(LED_PIN, HIGH);
  delay(1000);
  
  // Turn the LED off
  digitalWrite(LED_PIN, LOW);
  delay(1000);
}
```
In this example, we use the CB25N3 bit to solder the LED circuit, connecting the LED to the Arduino board and resistors on a breadboard.

Example 2: Soldering with Temperature Control (Python)

In this example, we'll use the CB25N3 bit with a Python script to control the temperature of the soldering iron and solder a more complex circuit.

Hardware Requirements:

Soldron 25W soldering iron with CB25N3 bit
 Temperature controller module (e.g., DS18B20)
 Python-enabled microcontroller (e.g., Raspberry Pi)

Software Requirements:

Python 3.x

Code:
```python
import time
import datetime
import board
import busio
import adafruit_ds18x20

# Initialize the temperature controller
ds18 = adafruit_ds18x20.DS18X20(busio.I2C(board.SCL, board.SDA))

# Set the desired temperature (in Celsius)
target_temp = 350

while True:
    # Read the current temperature
    temp = ds18.temperature
    
    # If the temperature is below the target, increase the iron's power
    if temp < target_temp:
        # Increase the power (e.g., using a relay module)
        print("Increasing power...")
        time.sleep(1)
    
    # If the temperature is above the target, decrease the iron's power
    elif temp > target_temp:
        # Decrease the power (e.g., using a relay module)
        print("Decreasing power...")
        time.sleep(1)
    
    # Wait for a short period before checking again
    time.sleep(0.5)
```
In this example, we use the CB25N3 bit with a temperature controller module and a Python script to control the temperature of the soldering iron and solder a more complex circuit.

Note: The above code examples are for illustrative purposes only and may require modifications to work with your specific setup. Always follow proper soldering safety guidelines and precautions when working with the CB25N3 bit and Soldron 25W soldering iron.