V6 Volcano Brass Length Extruder Nozzle 1.75mm x 1.0mm
V6 Volcano Brass Length Extruder Nozzle 1.75mm x 1.0mm
The V6 Volcano Brass Length Extruder Nozzle 1.75mm x 1.0mm is a critical component in 3D printing systems, specifically designed for use in Fused Deposition Modeling (FDM) and Fused Filament Fabrication (FFF) technologies. This nozzle is a key part of the extruder assembly, responsible for depositing molten filament onto a build platform to create three-dimensional objects.
The primary function of the V6 Volcano Brass Length Extruder Nozzle is to melt and dispense thermoplastic filament through a precisely controlled orifice, allowing for accurate and consistent deposition of material during the 3D printing process. The nozzle's design and material selection are optimized to achieve high-quality prints with improved layer adhesion, reduced warping, and enhanced surface finish.
Brass
Volcano
1.0mm
1.75mm
30mm
Threadless design
Compatible with V6 nozzle designs
| The V6 Volcano Brass Length Extruder Nozzle 1.75mm x 1.0mm is suitable for use in various 3D printing applications, including |
Hobbyist and enthusiast 3D printing
Rapid prototyping and product development
Model making and artistic creation
Production and manufacturing environments
Up to 300C (572F)
PLA, ABS, PETG, and other thermoplastic materials
Up to 150 mm/s (dependent on printer and settings)
The V6 Volcano Brass Length Extruder Nozzle 1.75mm x 1.0mm is backed by a limited warranty against manufacturing defects and material failures. Please refer to the manufacturer's documentation for specific warranty terms and conditions.
V6 Volcano Brass Length Extruder Nozzle 1.75mm x 1.0mm DocumentationOverviewThe V6 Volcano Brass Length Extruder Nozzle is a high-performance extruder nozzle designed for 3D printing applications. This nozzle features a 1.75mm diameter inlet and a 1.0mm diameter outlet, making it suitable for printing with a wide range of thermoplastic materials.Technical SpecificationsInlet diameter: 1.75mm
Outlet diameter: 1.0mm
Material: Brass
Length: V6 Volcano length (approximately 30mm)
Thread: M6 x 1.0
Temperature range: Up to 300CCode Examples### Example 1: Marlin Firmware ConfigurationThe following code snippet demonstrates how to configure the V6 Volcano Brass Length Extruder Nozzle in Marlin firmware:
```c
// Configuration.h
#define EXTRUDER_NOZZLE_SIZE 1.0
#define EXTRUDER_INLET_SIZE 1.75
#define EXTRUDER_HEATER_MAX_TEMP 300// Marlin_main.cpp
#include "Configuration.h"void setup() {
// Initialize extruder
extruder.init();
extruder.setNozzleSize(EXTRUDER_NOZZLE_SIZE);
extruder.setInletSize(EXTRUDER_INLET_SIZE);
extruder.setHeaterMaxTemp(EXTRUDER_HEATER_MAX_TEMP);
}
```
### Example 2: Slic3r Print SettingsThe following code snippet demonstrates how to configure the V6 Volcano Brass Length Extruder Nozzle in Slic3r print settings:
```python
# Slic3r print settings file (ini format)
[general]
extruder_nozzle_size = 1.0
extruder_inlet_size = 1.75
temperature_max = 300[layer_height]
layer_height = 0.2
```
### Example 3: Python Script for Printing with OctoPrintThe following code snippet demonstrates how to use the V6 Volcano Brass Length Extruder Nozzle with OctoPrint, a popular 3D printing remote control and monitoring software:
```python
import octoprint# Create an OctoPrint connection
printer = octoprint.OctoPrint('http://octoprint.local')# Set the extruder nozzle size
printer.set ExtruderNozzleSize(1.0)# Set the extruder inlet size
printer.set ExtruderInletSize(1.75)# Set the maximum temperature
printer.set TemperatureMax(300)# Start the print job
printer.start_print('path/to/gcode/file.gcode')
```
Note: The above examples are for illustration purposes only and may require modifications to adapt to specific use cases. It is recommended to consult the documentation of the specific 3D printing platform or software being used for more detailed information.