12V Warm White 5050 SMD LED Strip Flexible 5M/Roll NO Waterproof
12V Warm White 5050 SMD LED Strip Flexible 5M/Roll NO Waterproof
The 12V Warm White 5050 SMD LED Strip is a flexible, 5-meter long LED strip that features 5050 SMD (Surface Mount Device) LEDs, designed to provide warm white lighting for various applications. This LED strip is non-waterproof and operates at 12V DC.
The 12V Warm White 5050 SMD LED Strip is designed to provide a soft, warm white glow for ambient lighting, decorative lighting, or task lighting in various settings, such as homes, offices, or vehicles. The flexible nature of the strip allows it to be bent and shaped to fit curved or irregular surfaces.
-20C to 50C (-4F to 122F)
-20C to 70C (-4F to 158F)
20% to 80% RH (non-condensing)
This LED strip is not designed to be used in wet or humid environments. Exposure to water or moisture may damage the strip or cause electrical shock.
Avoid touching the electrical components or wires to prevent electrical shock.
Ensure the strip is installed and secured properly to prevent damage or injury.
RoHS (Restriction of Hazardous Substances) compliant
CE (Conformit Europene) certified
1-year limited warranty against manufacturing defects
Available through the manufacturer's website or customer support channels
Component Documentation: 12V Warm White 5050 SMD LED Strip Flexible 5M/Roll NO WaterproofOverviewThe 12V Warm White 5050 SMD LED Strip is a flexible, 5-meter-long strip of 5050 SMD LEDs that can be used to create custom lighting solutions for various applications. Each strip is comprised of 60 LEDs per meter, providing a total of 300 LEDs per 5-meter roll. The strip operates at 12V DC and is designed for indoor use only, as it is not waterproof.Technical SpecificationsVoltage: 12V DC
LED Type: 5050 SMD
LED Density: 60 LEDs/meter
Strip Length: 5 meters
Color Temperature: Warm White (2800K-3200K)
Luminous Flux: 240-280 lumens/meter
Viewing Angle: 120
Operating Temperature: -20C to 60C
Storage Temperature: -20C to 80CPinout and ConnectionThe LED strip has a 2-pin JST connector at one end, with the anode (positive) leg marked as "+" and the cathode (negative) leg marked as "-".Example Usage### Example 1: Arduino-Controlled LED StripIn this example, we will use an Arduino Uno board to control the LED strip. We will connect the LED strip to a 12V DC power supply and use the Arduino to control the strip's brightness.Hardware RequirementsArduino Uno
12V DC power supply
12V Warm White 5050 SMD LED Strip
Jumper wiresCode
```c++
const int ledPin = 9; // LED strip connected to digital pin 9void setup() {
pinMode(ledPin, OUTPUT);
}void loop() {
// Fade in the LED strip
for (int i = 0; i < 256; i++) {
analogWrite(ledPin, i);
delay(10);
}
// Fade out the LED strip
for (int i = 255; i >= 0; i--) {
analogWrite(ledPin, i);
delay(10);
}
}
```
### Example 2: Raspberry Pi-Controlled LED StripIn this example, we will use a Raspberry Pi to control the LED strip. We will connect the LED strip to a 12V DC power supply and use the Raspberry Pi's GPIO pins to control the strip's brightness.Hardware RequirementsRaspberry Pi
12V DC power supply
12V Warm White 5050 SMD LED Strip
Jumper wiresCode
```python
import RPi.GPIO as GPIO
import time# Set up GPIO pin 17 as an output
GPIO.setmode(GPIO.BCM)
GPIO.setup(17, GPIO.OUT)try:
while True:
# Fade in the LED strip
for i in range(0, 101, 1):
GPIO.output(17, GPIO.HIGH)
time.sleep(0.01 i)
GPIO.output(17, GPIO.LOW)
time.sleep(0.01 (100 - i))
# Fade out the LED strip
for i in range(100, -1, -1):
GPIO.output(17, GPIO.HIGH)
time.sleep(0.01 i)
GPIO.output(17, GPIO.LOW)
time.sleep(0.01 (100 - i))
except KeyboardInterrupt:
GPIO.cleanup()
```
Important NotesWhen working with the LED strip, ensure that you are using a suitable 12V DC power supply that can provide the required current.
Always handle the LED strip with care, as it can be damaged by excessive bending or twisting.
The LED strip is not suitable for outdoor use or in humid environments, as it is not waterproof.