USB A-B Cable for Arduino (20cm)(Colour may vary) Documentation

Component Name

USB A-B Cable for Arduino (20cm)

Description

The USB A-B Cable for Arduino is a high-quality, 20cm long cable designed specifically for connecting Arduino boards to a computer or other host device. This cable is an essential component for programming, debugging, and powering Arduino projects.

Functionality

The primary function of this cable is to establish a reliable and efficient connection between an Arduino board and a computer or other host device. The cable allows for

Data Transfer

Enables communication between the Arduino board and the computer, facilitating the transfer of data, programs, and commands.

Power Supply

Provides power to the Arduino board from the computer or host device, eliminating the need for an external power source.

Programming and Debugging

Allows for easy programming and debugging of Arduino projects, ensuring a seamless development experience.

Length

20cm (7.87 inches), providing a convenient and manageable cable length for most Arduino setups.

USB A-B Connector

Features a standard USB A connector on one end and a USB B connector on the other, ensuring compatibility with most Arduino boards and computers.

Colour May Vary

The cable colour may differ from the one shown in the product image, but the quality and functionality remain unchanged.

High-Quality Construction

The cable is built with durable materials and shielded to minimize electromagnetic interference (EMI), ensuring reliable data transmission and power supply.

Compatibility

Compatible with most Arduino boards, including Uno, Nano, Mega, and Due, as well as other microcontroller boards and devices with USB B connectors.

Operating Temperature

The cable is designed to operate within a wide temperature range, typically between -20C to 80C (-4F to 176F).

Cable Length

20cm (7.87 inches)

Cable Type

USB A-B cable

Connector Type

USB A (male) and USB B (male)

Wire Gauge

AWG 28-24

Power Rating

Up to 2.5A (depending on the host device and Arduino board)

Data Transfer Rate

Up to 480 Mbps (USB 2.0 standard)

Packaging and Accessories

The USB A-B Cable for Arduino typically comes packaged in a single piece, without any additional accessories.

Conclusion

The USB A-B Cable for Arduino is a reliable and efficient solution for connecting Arduino boards to computers or other host devices. Its high-quality construction, durable materials, and compatibility with a wide range of Arduino boards make it an essential component for any Arduino project.

Pin Configuration

USB A-B Cable for Arduino (20cm) Pinout Explanation
The USB A-B Cable for Arduino is a standard USB cable used to connect Arduino boards to a computer or other devices. The cable has a Type-A connector on one end and a Type-B connector on the other. Here's a detailed explanation of the pins on the Type-B connector, which connects to the Arduino board:
Type-B Connector (Arduino End) Pinout:
1. Pin 1: VBUS (5V)
This pin provides a 5V power supply from the computer to the Arduino board.
Connects to the VCC pin on the Arduino board, which powers the board.
2. Pin 2: D- (Data -)
This pin is one of the two data transfer lines used for communication between the computer and the Arduino board.
Connects to the TX (Transmit) pin on the Arduino board.
3. Pin 3: D+ (Data +)
This pin is the other data transfer line used for communication between the computer and the Arduino board.
Connects to the RX (Receive) pin on the Arduino board.
4. Pin 4: GND (Ground)
This pin provides a common ground connection between the computer and the Arduino board.
Connects to one of the GND pins on the Arduino board.
5. Pin 5: ID (Not Connected)
This pin is not connected to any pin on the Arduino board.
Reserved for future use or special applications.
Connection Structure:
To connect the USB A-B Cable to your Arduino board:
1. Connect the Type-B connector to the Arduino board's USB connector.
2. Match the pinouts on the cable to the corresponding pins on the Arduino board:
VBUS (5V) on the cable connects to VCC on the Arduino board.
D- (Data -) on the cable connects to TX (Transmit) on the Arduino board.
D+ (Data +) on the cable connects to RX (Receive) on the Arduino board.
GND (Ground) on the cable connects to one of the GND pins on the Arduino board.
3. Ensure the cable is securely connected to both the computer and the Arduino board.
Note: The specific pinouts on the Arduino board may vary depending on the board model and version. Always refer to the Arduino board's documentation or datasheet for specific pinout information.

Code Examples

USB A-B Cable for Arduino (20cm) Documentation

Overview

The USB A-B Cable for Arduino is a 20cm long cable used to connect Arduino boards to a computer or other devices with a USB-A port. It is a standard USB 2.0 cable, compatible with most Arduino boards, including Uno, Nano, and Mega.

Technical Specifications

Cable length: 20cm
 Connector type: USB-A (male) to USB-B (male)
 Compatible with: Arduino Uno, Nano, Mega, and other boards with USB-B interface
 Data transfer rate: Up to 480 Mbps (USB 2.0)

Usage Examples

### Example 1: Connecting Arduino Uno to a Computer

Hardware Requirements

Arduino Uno board
 USB A-B Cable for Arduino (20cm)
 Computer with USB-A port

Software Requirements

Arduino Integrated Development Environment (IDE)

Code Example
```c
void setup() {
  Serial.begin(9600); // Initialize serial communication at 9600 bps
}

void loop() {
  Serial.println("Hello, World!"); // Print a message to the serial monitor
  delay(1000); // Wait for 1 second
}
```
Connection Steps

1. Connect the USB-A end of the cable to the computer's USB-A port.
2. Connect the USB-B end of the cable to the Arduino Uno's USB-B port.
3. Open the Arduino IDE and select the correct board and serial port.
4. Upload the code to the Arduino board.
5. Open the serial monitor to see the output "Hello, World!" printed every second.

### Example 2: Programming Arduino Nano with a USB A-B Cable

Hardware Requirements

Arduino Nano board
 USB A-B Cable for Arduino (20cm)
 Computer with USB-A port

Software Requirements

Arduino Integrated Development Environment (IDE)

Code Example
```c
const int ledPin = 13; // Define the LED pin on Arduino Nano

void setup() {
  pinMode(ledPin, OUTPUT); // Set the LED pin as an output
}

void loop() {
  digitalWrite(ledPin, HIGH); // Turn on the LED
  delay(500); // Wait for 0.5 seconds
  digitalWrite(ledPin, LOW); // Turn off the LED
  delay(500); // Wait for 0.5 seconds
}
```
Connection Steps

1. Connect the USB-A end of the cable to the computer's USB-A port.
2. Connect the USB-B end of the cable to the Arduino Nano's USB-B port.
3. Open the Arduino IDE and select the correct board and serial port.
4. Upload the code to the Arduino board.
5. Observe the LED connected to pin 13 on the Arduino Nano blinking on and off.

Note: The code examples provided are basic demonstrations of using the USB A-B Cable for Arduino. You can experiment with more complex projects and applications using this cable to connect your Arduino boards to computers or other devices.