230V 25W Soldron Soldering Iron
230V 25W Soldron Soldering Iron
The 230V 25W Soldron Soldering Iron is a high-quality, temperature-controlled soldering iron designed for various electronics and DIY applications. This component is specifically engineered for demanding soldering tasks, providing precise control over temperature and ensuring reliable connections.
| The primary function of the 230V 25W Soldron Soldering Iron is to melt and apply solder to electrical components, connectors, and PCBs (Printed Circuit Boards). This soldering iron is designed to |
230V AC
25W
150C to 450C (302F to 842F)
Ceramic heating element
Copper
Insulated plastic
1.5 meters
Approximately 200 grams
140 x 30 x 20 mm (5.5 x 1.2 x 0.8 inches)
| The 230V 25W Soldron Soldering Iron is suitable for a wide range of applications, including |
Electronics repair and assembly
DIY projects and prototyping
PCB assembly and rework
Appliance repair and maintenance
Jewelry making and metalwork
| The 230V 25W Soldron Soldering Iron complies with relevant safety and performance standards, including |
CE certification
RoHS compliance
UL (Underwriters Laboratories) certification
The component is backed by a 1-year limited warranty, providing assurance of quality and reliability. Additionally, technical support and documentation are available to ensure optimal performance and troubleshooting.
Component Documentation: 230V 25W Soldron Soldering IronOverviewThe 230V 25W Soldron Soldering Iron is a high-quality soldering iron designed for various applications, including electronics prototyping, repair, and manufacturing. This documentation provides a comprehensive guide on how to use this component in various contexts.Technical SpecificationsInput Voltage: 230V AC
Power: 25W
Temperature Range: 200C - 450C
Heating Element: Copper resistive heating element
Tip Type: Insulated, interchangeable
Cable Length: 1.5mSafety PrecautionsAlways handle the soldering iron with care, as it can reach high temperatures.
Ensure proper ventilation when using the soldering iron to avoid inhaling fumes.
Keep the soldering iron away from flammable materials.
Unplug the soldering iron when not in use.Code Examples### Example 1: Basic Soldering Iron Control using ArduinoIn this example, we will demonstrate how to control the soldering iron using an Arduino board. We will use a relay module to switch the soldering iron on and off.Hardware RequirementsArduino Board (e.g., Arduino Uno)
Relay Module (e.g., SRD-05VDC-SL-C)
230V 25W Soldron Soldering Iron
Breadboard and jumper wiresCode
```c++
const int relayPin = 2; // Pin connected to relay modulevoid setup() {
pinMode(relayPin, OUTPUT);
}void loop() {
// Turn on the soldering iron
digitalWrite(relayPin, HIGH);
delay(5000); // Wait for 5 seconds// Turn off the soldering iron
digitalWrite(relayPin, LOW);
delay(5000); // Wait for 5 seconds
}
```
### Example 2: Soldering Iron Temperature Control using Raspberry Pi and PythonIn this example, we will demonstrate how to control the temperature of the soldering iron using a Raspberry Pi and Python. We will use a thermistor to measure the temperature and a relay module to switch the soldering iron on and off.Hardware RequirementsRaspberry Pi (e.g., Raspberry Pi 4)
Thermistor (e.g., NTC 10Kohm)
Relay Module (e.g., SRD-05VDC-SL-C)
230V 25W Soldron Soldering Iron
Breadboard and jumper wiresCode
```python
import RPi.GPIO as GPIO
import time# Set up GPIO pins
GPIO.setmode(GPIO.BCM)
relay_pin = 17
thermistor_pin = 18# Set up relay pin as output
GPIO.setup(relay_pin, GPIO.OUT)# Set up thermistor pin as input
GPIO.setup(thermistor_pin, GPIO.IN)def read_temperature():
# Read temperature from thermistor
resistance = (1023 / GPIO.input(thermistor_pin)) - 1
temperature = 1 / (log(resistance / 10000) / 3977 + 1/298.15) - 273.15
return temperaturewhile True:
temperature = read_temperature()
if temperature < 250:
# Turn on the soldering iron if temperature is below 250C
GPIO.output(relay_pin, GPIO.HIGH)
else:
# Turn off the soldering iron if temperature is above 250C
GPIO.output(relay_pin, GPIO.LOW)
time.sleep(1)
```
### Example 3: Integrating with Home Automation System using ESP32 and MicroPythonIn this example, we will demonstrate how to integrate the soldering iron with a home automation system using an ESP32 board and MicroPython. We will use a relay module to switch the soldering iron on and off and control it remotely using a mobile app.Hardware RequirementsESP32 Board (e.g., ESP32 DevKitC)
Relay Module (e.g., SRD-05VDC-SL-C)
230V 25W Soldron Soldering Iron
Breadboard and jumper wires
Mobile app (e.g., Blynk)Code
```python
import machine
import blynk# Set up relay pin as output
relay_pin = machine.Pin(2, machine.Pin.OUT)# Set up Blynk library
blynk.begin('YourAuthToken')@blynk.on('V0') # Virtual pin 0
def soldering_iron_control(pin, state):
if state == 1:
relay_pin.value(1) # Turn on the soldering iron
else:
relay_pin.value(0) # Turn off the soldering ironblynk.run()
```
Note: In this example, you need to replace `'YourAuthToken'` with your actual Blynk authentication token.