Male to Female Jumper Wires (20cm) 40pcs
Male to Female Jumper Wires (20cm) 40pcs
The Male to Female Jumper Wires (20cm) 40pcs is a set of 40 jumper wires, each measuring 20cm in length, used to connect electronic components and modules in various IoT projects and applications. These wires are designed to provide a flexible and convenient way to connect devices, prototyping platforms, and breadboards, making them an essential component for any electronic enthusiast or professional.
The primary function of the Male to Female Jumper Wires is to establish a temporary or permanent connection between two devices or components. The male end of the wire is inserted into a female port or socket, while the female end is connected to a male port or pin. This allows users to connect devices with different pin configurations, such as Arduino boards, Raspberry Pi, or other microcontrollers, to various sensors, modules, or peripherals.
20cm (7.87 inches)
Insulated copper wire
Male and female
40 pieces
| Color-coded | Yes |
| Breadboard-friendly | Yes |
High
High
| The Male to Female Jumper Wires (20cm) 40pcs are ideal for a wide range of IoT projects and applications, including |
Prototyping and testing circuits
Connecting sensors and modules to microcontrollers
Interfacing with breadboards and development boards
Creating wearable electronics and IoT devices
Building robotics and automation projects
Overall, the Male to Female Jumper Wires (20cm) 40pcs are an essential component for any electronic enthusiast or professional, providing a convenient and reliable way to connect devices and components in various IoT projects and applications.
Male to Female Jumper Wires (20cm) 40pcs.OverviewThe Male to Female Jumper Wires (20cm) 40pcs. is a set of 40 jumper wires with male connectors on one end and female connectors on the other. Each wire is 20cm in length, making them ideal for prototyping and breadboarding electronic projects. These jumper wires are commonly used to connect components, modules, and sensors to microcontrollers, development boards, and other electronic devices.Technical SpecificationsWire length: 20cm
Connector type: Male (1 end) and Female (1 end)
Wire material: Copper
Insulation material: PVC
Number of pieces: 40
Color: Multicolored (10 colors, 4 wires per color)Using Male to Female Jumper Wires in Various Contexts### Example 1: Connecting a Sensor to an Arduino BoardIn this example, we will use the Male to Female Jumper Wires to connect a DHT11 temperature and humidity sensor to an Arduino Uno board.Hardware RequirementsArduino Uno board
DHT11 temperature and humidity sensor
Male to Female Jumper Wires (20cm) 40pcs.Code Example (Arduino Sketch)
```c
#include <DHT.h>#define DHTPIN 2 // DHT11 sensor pin connected to digital pin 2 of ArduinoDHT dht(DHTPIN, DHT11);void setup() {
Serial.begin(9600);
dht.begin();
}void loop() {
int h = dht.readHumidity();
int t = dht.readTemperature();Serial.print("Humidity: ");
Serial.print(h);
Serial.println("%");
Serial.print("Temperature: ");
Serial.print(t);
Serial.println("C");delay(2000);
}
```
ConnectionsConnect the VCC pin of the DHT11 sensor to the 5V pin of the Arduino board using a Male to Female Jumper Wire.
Connect the GND pin of the DHT11 sensor to the GND pin of the Arduino board using a Male to Female Jumper Wire.
Connect the DATA pin of the DHT11 sensor to digital pin 2 of the Arduino board using a Male to Female Jumper Wire.### Example 2: Connecting a Breadboard to a Raspberry PiIn this example, we will use the Male to Female Jumper Wires to connect a breadboard to a Raspberry Pi.Hardware RequirementsRaspberry Pi
Breadboard
Male to Female Jumper Wires (20cm) 40pcs.
LEDs and resistors (for testing purposes)Code Example (Python Script)
```python
import RPi.GPIO as GPIO
import timeGPIO.setmode(GPIO.BCM)# Set up GPIO pins for output
GPIO.setup(17, GPIO.OUT)
GPIO.setup(23, GPIO.OUT)while True:
# Turn on LED connected to GPIO pin 17
GPIO.output(17, GPIO.HIGH)
time.sleep(1)# Turn off LED connected to GPIO pin 17
GPIO.output(17, GPIO.LOW)
time.sleep(1)# Turn on LED connected to GPIO pin 23
GPIO.output(23, GPIO.HIGH)
time.sleep(1)# Turn off LED connected to GPIO pin 23
GPIO.output(23, GPIO.LOW)
time.sleep(1)
```
ConnectionsConnect the GPIO pins of the Raspberry Pi to the breadboard using Male to Female Jumper Wires.
Connect the LEDs and resistors to the breadboard.
Connect the other end of the Male to Female Jumper Wires to the corresponding GPIO pins on the Raspberry Pi.These examples demonstrate the versatility of the Male to Female Jumper Wires (20cm) 40pcs. in connecting various components and modules to microcontrollers, development boards, and other electronic devices.