Solar DC Mini Submersible Water Pump Motor 12V
Solar DC Mini Submersible Water Pump Motor 12V
The Solar DC Mini Submersible Water Pump Motor 12V is a compact, energy-efficient, and environmentally friendly component designed for use in various water pumping applications. This submersible pump motor is specifically engineered to operate with a 12V DC power supply, making it an ideal choice for solar-powered systems.
| The primary function of this component is to drive a submersible water pump, which is typically used for water circulation, irrigation, or drainage in various settings, such as |
Irrigation systems
Fountains and water features
Pond and lake management
Rainwater harvesting systems
Small-scale water supply systems
12V DC
[Insert specific value or range]
[Insert specific value or range]
[Insert specific value or range] RPM
[Insert specific class, e.g., IP68]
[Insert specific range, e.g., -20C to 40C]
[Insert specific range, e.g., -30C to 60C]
[Insert specific dimensions, e.g., 60 mm x 40 mm x 30 mm]
[Insert specific weight, e.g., 0.5 kg]
| The Solar DC Mini Submersible Water Pump Motor 12V meets or exceeds various industry standards and regulations, including |
[Insert relevant certifications, e.g., CE, RoHS, UL]
[Insert relevant compliance standards, e.g., IP68, ISO 9001]
| This component is suitable for a wide range of applications, including |
Solar-powered water pumping systems
Off-grid water supply systems
Irrigation systems for agriculture and landscaping
Water feature and fountain systems
Pond and lake management systems
Rainwater harvesting systems
The Solar DC Mini Submersible Water Pump Motor 12V is backed by a [insert specific warranty period, e.g., 1-year] limited warranty. Dedicated technical support is available for assistance with installation, operation, and maintenance.
Solar DC Mini Submersible Water Pump Motor 12V DocumentationOverviewThe Solar DC Mini Submersible Water Pump Motor 12V is a compact, high-efficiency submersible pump motor designed for use in solar-powered systems. This motor is suitable for small-scale water supply systems, irrigation, and other applications where a reliable and efficient water pumping solution is required.Technical SpecificationsVoltage: 12V DC
Power: 10W
Current: 0.8A
Speed: 2500-3000 RPM
Water Flow Rate: 1.5-2.5 L/min
Water Lift: 10-15 meters
Insulation Class: IP68 (fully submersible)
Operating Temperature: -20C to 40CConnection DiagramThe motor has two wire connections: Positive (+) and Negative (-). Connect the positive wire to the positive terminal of the power source (e.g., solar panel or battery) and the negative wire to the negative terminal.Code Examples### Example 1: Basic Arduino ControlThis example demonstrates how to control the Solar DC Mini Submersible Water Pump Motor 12V using an Arduino board.Hardware RequirementsArduino Board (e.g., Arduino Uno)
Solar DC Mini Submersible Water Pump Motor 12V
Breadboard and jumper wiresSoftware RequirementsArduino IDE (version 1.8.13 or later)Code
```c
const int motorPin = 9; // Choose a digital pin on the Arduino boardvoid setup() {
pinMode(motorPin, OUTPUT);
}void loop() {
digitalWrite(motorPin, HIGH); // Turn the motor on
delay(10000); // Run the motor for 10 seconds
digitalWrite(motorPin, LOW); // Turn the motor off
delay(5000); // Wait for 5 seconds before restarting
}
```
Note: In this example, the motor is connected to digital pin 9 of the Arduino board. The `digitalWrite()` function is used to turn the motor on and off.### Example 2: Solar-Powered Water Pumping System with a Raspberry PiThis example demonstrates how to control the Solar DC Mini Submersible Water Pump Motor 12V using a Raspberry Pi and a solar panel as a power source.Hardware RequirementsRaspberry Pi (e.g., Raspberry Pi 4)
Solar DC Mini Submersible Water Pump Motor 12V
Solar panel (e.g., 12V, 10W)
Breadboard and jumper wiresSoftware RequirementsRaspbian OS (version 10 or later)
Python 3.xCode
```python
import RPi.GPIO as GPIO
import time# Set up GPIO mode
GPIO.setmode(GPIO.BCM)# Set up the motor control pin
motor_pin = 17
GPIO.setup(motor_pin, GPIO.OUT)try:
while True:
# Check the solar panel's voltage (assuming a voltage sensor is connected)
voltage = read_voltage_sensor()
if voltage > 12.5: # Check if the voltage is sufficient
GPIO.output(motor_pin, GPIO.HIGH) # Turn the motor on
time.sleep(60) # Run the motor for 1 minute
else:
GPIO.output(motor_pin, GPIO.LOW) # Turn the motor off
time.sleep(5) # Wait for 5 seconds before checking again
except KeyboardInterrupt:
GPIO.cleanup()
```
Note: In this example, the motor is connected to GPIO pin 17 of the Raspberry Pi. The `RPi.GPIO` library is used to control the motor, and a voltage sensor is assumed to be connected to monitor the solar panel's voltage.These code examples demonstrate the basic usage of the Solar DC Mini Submersible Water Pump Motor 12V in different contexts. Please adapt the code to your specific application and ensure proper safety measures are in place when working with electrical components.