33k Ohm Resistor - (Pack of 10)
33k Ohm Resistor - (Pack of 10)
The 33k Ohm Resistor is a common passive electronic component used to control the flow of electrical current in a circuit. This pack of 10 resistors provides a convenient and cost-effective way to stock up on these essential components for various IoT projects and applications.
| A resistor is a fundamental component in electronic circuits, and its primary function is to reduce the voltage or current in a circuit by converting some of the energy into heat. The 33k Ohm Resistor is designed to provide a specific resistance to the flow of electric current, which helps to |
| The 33k Ohm Resistor is suitable for a wide range of IoT projects and applications, including |
| The 33k Ohm Resistor is compatible with most electronic development boards, microcontrollers, and devices, including |
The 33k Ohm Resistor is a versatile and reliable component that can be used in a wide range of IoT applications. Its precise resistance value, high reliability, and compact size make it an essential component for any IoT project. With this pack of 10 resistors, you'll be well-stocked to tackle your next IoT project or prototype.
33k Ohm Resistor - (Pack of 10) DocumentationOverviewThe 33k Ohm Resistor is a pack of 10 resistors with a resistance value of 33 kiloohms (33,000 ohms). Resistors are fundamental components in electronic circuits, used to limit current, divide voltage, and provide impedance matching. This pack of 10 resistors is suitable for a wide range of applications, from prototyping to production, and is compatible with most electronic development boards and microcontrollers.Key SpecificationsResistance: 33 k (33,000 ohms)
Tolerance: 5%
Power Rating: 1/4 watt
Package: Through-hole (THD)
Quantity: 10 piecesCode Examples### Example 1: Basic LED Circuit with ArduinoIn this example, we'll use the 33k Ohm Resistor to limit the current flowing through an LED connected to an Arduino board.Hardware RequirementsArduino Board (e.g., Arduino Uno)
33k Ohm Resistor (from the pack of 10)
LED (any color)
Breadboard
Jumper WiresSoftware RequirementsArduino IDE (version 1.8.x or later)Code
```c
const int ledPin = 13; // LED connected to digital pin 13
const int resistorPin = 12; // 33k Ohm Resistor connected to digital pin 12void setup() {
pinMode(ledPin, OUTPUT);
pinMode(resistorPin, OUTPUT);
}void loop() {
digitalWrite(ledPin, HIGH); // Turn on the LED
digitalWrite(resistorPin, LOW); // Ground the resistor
delay(1000); // Wait 1 second
digitalWrite(ledPin, LOW); // Turn off the LED
delay(1000); // Wait 1 second
}
```
ExplanationIn this example, we connect the LED to digital pin 13 and the 33k Ohm Resistor to digital pin 12 of the Arduino board. The resistor is used to limit the current flowing through the LED. The code toggles the LED on and off every second, demonstrating the basic use of the resistor in a simple circuit.### Example 2: Voltage Divider Circuit with Raspberry PiIn this example, we'll use the 33k Ohm Resistor as part of a voltage divider circuit to measure the voltage level of a sensor connected to a Raspberry Pi.Hardware RequirementsRaspberry Pi (any model)
33k Ohm Resistor (from the pack of 10)
10k Ohm Resistor
Breadboard
Jumper Wires
Sensor (e.g., temperature sensor, photodiode, etc.)Software RequirementsPython (version 3.x or later)Code
```python
import RPi.GPIO as GPIO# Set up GPIO mode
GPIO.setmode(GPIO.BCM)# Define sensor pin and voltage divider pins
sensor_pin = 17
voltage_divider_pin = 23# Set up voltage divider circuit
GPIO.setup(voltage_divider_pin, GPIO.OUT)
GPIO.output(voltage_divider_pin, GPIO.HIGH)# Calculate voltage reading
voltage_reading = (GPIO.input(sensor_pin) 3.3) / (1 + (33000 / 10000))print("Voltage Reading:", voltage_reading)
```
ExplanationIn this example, we create a voltage divider circuit using the 33k Ohm Resistor and a 10k Ohm Resistor. The sensor is connected to the Raspberry Pi's GPIO pin 17, and the voltage divider circuit is connected to GPIO pin 23. The code calculates the voltage reading from the sensor based on the voltage divider circuit and prints the result. This demonstrates the use of the 33k Ohm Resistor in a more complex circuit.ConclusionThe 33k Ohm Resistor is a versatile component suitable for a wide range of applications. These code examples demonstrate its use in basic LED circuits and voltage divider circuits with popular development boards like Arduino and Raspberry Pi.