65mm x 30mm x 5mm
65mm x 30mm x 5mm
12g
0C to 50C
<2.5W
5V, 1A
Applications
| The Raspberry Pi Zero 2 W with Headers is an ideal choice for a wide range of IoT projects, including |
Robotics and automation
Home automation and security systems
Wearable devices and IoT gadgets
Prototyping and proof-of-concept development
Embedded systems and industrial control systems
Development Tools and Resources
| The Raspberry Pi Zero 2 W with Headers is supported by a wide range of development tools and resources, including |
Raspberry Pi OS and related documentation
Official Raspberry Pi tutorials and guides
Community-driven forums and discussion groups
Extensive libraries and APIs for programming languages like Python, C++, and Java
Conclusion
The Raspberry Pi Zero 2 W with Headers is a powerful, feature-rich, and highly affordable SBC, making it an ideal choice for IoT enthusiasts, hobbyists, and professionals. Its compact size, low power consumption, and extensive range of features make it suitable for a wide range of applications, from simple gadgets to complex systems.
Raspberry Pi Zero 2 W with Headers DocumentationOverviewThe Raspberry Pi Zero 2 W with Headers is a compact, low-cost, and highly capable single-board computer (SBC) designed for IoT, robotics, and embedded systems applications. This version comes with pre-soldered headers, making it easy to connect peripherals and sensors. The Raspberry Pi Zero 2 W is built around the Broadcom BCM2710A1 system-on-chip (SoC), which features a quad-core Cortex-A53 CPU, dual-band 802.11b/g/n wireless networking, and Bluetooth 4.2.SpecificationsProcessor: Broadcom BCM2710A1 quad-core Cortex-A53 CPU
Clock Speed: 1 GHz
RAM: 512 MB
Storage: MicroSD card slot
Wireless: Dual-band 802.11b/g/n Wi-Fi, Bluetooth 4.2
Interfaces: HDMI, USB 2.0, Micro-USB, CSI camera interface, 40-pin GPIO header
Power: Micro-USB, supports USB OTG
Operating System: Raspberry Pi OS (based on Linux)Code Examples### Example 1: GPIO Control using PythonIn this example, we will use the Raspberry Pi Zero 2 W to control an LED connected to one of the GPIO pins.Hardware RequirementsRaspberry Pi Zero 2 W with Headers
Breadboard
LED
1 k resistor
Jumper wiresSoftware RequirementsRaspberry Pi OS (latest version)
Python 3.xCode
```python
import RPi.GPIO as GPIO
import time# Set up GPIO mode
GPIO.setmode(GPIO.BCM)# Set up pin 17 as an output
GPIO.setup(17, GPIO.OUT)try:
while True:
# Turn on the LED
GPIO.output(17, GPIO.HIGH)
time.sleep(1)
# Turn off the LED
GPIO.output(17, GPIO.LOW)
time.sleep(1)except KeyboardInterrupt:
# Clean up GPIO on exit
GPIO.cleanup()
```
ExplanationThis code uses the RPi.GPIO library to control the GPIO pin 17, which is connected to the LED. The `GPIO.setmode(GPIO.BCM)` function sets the GPIO mode to Broadcom numbering. The `GPIO.setup(17, GPIO.OUT)` function sets pin 17 as an output. The `GPIO.output(17, GPIO.HIGH)` and `GPIO.output(17, GPIO.LOW)` functions turn the LED on and off, respectively. The `time.sleep(1)` function introduces a 1-second delay between each state change.### Example 2: Wi-Fi Connectivity using PythonIn this example, we will use the Raspberry Pi Zero 2 W to connect to a Wi-Fi network and retrieve a web page using Python.Hardware RequirementsRaspberry Pi Zero 2 W with Headers
Wi-Fi network
Internet connectionSoftware RequirementsRaspberry Pi OS (latest version)
Python 3.x
`requests` library (install using `pip install requests`)Code
```python
import requests# Set up Wi-Fi connection
ssid = 'your_wifi_ssid'
password = 'your_wifi_password'# Connect to Wi-Fi
print('Connecting to Wi-Fi...')
import subprocess
subprocess.run(['sudo', 'iwconfig', 'wlan0', 'essid', ssid])
subprocess.run(['sudo', 'iwconfig', 'wlan0', 'key', password])# Check Wi-Fi connection
print('Checking Wi-Fi connection...')
import subprocess
result = subprocess.run(['sudo', 'iwconfig', 'wlan0', 'link'])
if result.returncode == 0:
print('Wi-Fi connected!')# Retrieve a web page
print('Retrieving a web page...')
response = requests.get('https://www.example.com')
print(response.text)
```
ExplanationThis code uses the `requests` library to connect to a Wi-Fi network and retrieve a web page. The `subprocess` module is used to run shell commands to configure the Wi-Fi interface. The `iwconfig` command is used to set the Wi-Fi SSID and password. The `link` command is used to check the Wi-Fi connection status. Finally, the `requests.get()` function is used to retrieve the web page.Note: Replace `your_wifi_ssid` and `your_wifi_password` with your actual Wi-Fi credentials.These examples demonstrate the versatility and ease of use of the Raspberry Pi Zero 2 W with Headers in various IoT applications.