11.1v 5200mah 35C 3S1P Bonka Lipo Battery
11.1v 5200mah 35C 3S1P Bonka Lipo Battery
The 11.1v 5200mah 35C 3S1P Bonka Lipo Battery is a high-performance lithium-polymer (LiPo) battery designed for demanding applications in the internet of things (IoT), robotics, and drone industries. This battery module is engineered to provide reliable and efficient power supply to devices, ensuring consistent performance and extended operating times.
The primary function of the 11.1v 5200mah 35C 3S1P Bonka Lipo Battery is to store electrical energy and supply it to devices as needed. This battery module is designed to deliver high currents and provide a stable voltage output, making it suitable for applications that require reliable power supply.
11.1v (nominal voltage)
The battery's nominal voltage is 11.1v, which is the voltage rating at which the battery operates most efficiently.
5200mah (milliampere-hours)
The battery's capacity is 5200mah, which represents the amount of electric charge it can store. A higher capacity indicates a longer operating time for devices.
35C
The discharge rate, denoted by the "C" rating, represents the battery's ability to supply current. A 35C rating indicates that the battery can supply 35 times its capacity in amperes (A) for a short duration. In this case, the battery can supply approximately 182A (5200mah x 35C) for a short time.
3S1P
The "3S" configuration indicates that the battery pack consists of three cells connected in series, providing a higher voltage output.
The "1P" configuration indicates that there is only one parallel group of cells, which affects the battery's capacity and discharge rate.
The LiPo battery chemistry provides a high energy density, allowing the battery to store more energy relative to its size and weight.
The battery's design ensures low internal resistance, which reduces heat generation and increases efficiency during discharge.
The battery module may include a built-in protection circuit to prevent overcharge, over-discharge, and over-current conditions, ensuring safe operation and longer battery life.
-20C to 50C (-4F to 122F)
-30C to 30C (-22F to 86F)
The dimensions of the battery module will vary depending on the specific design and packaging. Please consult the manufacturer's documentation for detailed dimensions and mechanical specifications.
| The 11.1v 5200mah 35C 3S1P Bonka Lipo Battery is suitable for various IoT applications, including |
Robotics and drones
High-performance sensors and devices
Wireless communication systems
IoT gateways and hubs
Industrial automation and control systems
When handling LiPo batteries, it is essential to follow proper safety guidelines to prevent damage, injury, or fires. Ensure proper charging and storage procedures are followed, and take necessary precautions to avoid overcharging, short-circuiting, or physical damage to the battery module.
Component Documentation: 11.1v 5200mah 35C 3S1P Bonka Lipo BatteryOverviewThe 11.1v 5200mah 35C 3S1P Bonka Lipo Battery is a high-performance Lithium-Polymer (LiPo) battery designed for use in various applications requiring high power and energy density. This battery is suitable for robotics, drones, RC models, and other IoT projects that demand reliable power supply.SpecificationsNominal Voltage: 11.1V
Capacity: 5200mAh
Discharge Rate: 35C
Configuration: 3S1P (3 cells in series, 1 parallel group)
Weight: approximately 340g
Dimensions: 139 x 44 x 25mmCharging and DischargingTo ensure safe and efficient operation, it is essential to follow proper charging and discharging procedures:Charge the battery using a LiPo charger with a maximum charge current of 2A.
Charge the battery to a maximum voltage of 12.6V.
Avoid over-discharging the battery below 9V.
Monitor the battery's state of charge (SOC) and voltage to prevent damage.Code ExamplesHere are a few examples demonstrating how to use the 11.1v 5200mah 35C 3S1P Bonka Lipo Battery in various contexts:Example 1: Arduino Battery Voltage MonitoringThis example uses an Arduino board to monitor the battery voltage and display it on an LCD screen.```cpp
#include <LiquidCrystal.h>#define VBATPIN A0 // Analog pin for battery voltage measurementLiquidCrystal_I2C lcd(0x27, 16, 2); // Initialize LCD displayvoid setup() {
lcd.init(); // Initialize LCD
lcd.backlight(); // Turn on LCD backlight
}void loop() {
int sensorValue = analogRead(VBATPIN); // Read battery voltage
float batteryVoltage = sensorValue 0.011; // Convert to voltage value
lcd.setCursor(0, 0); // Set cursor to top-left corner
lcd.print("Battery Voltage: ");
lcd.print(batteryVoltage);
lcd.print(" V");
delay(1000); // Update every 1 second
}
```Example 2: Python Script for Battery Capacity MonitoringThis example uses a Raspberry Pi with a Python script to monitor the battery capacity and send notifications when the capacity falls below a certain threshold.```python
import RPi.GPIO as GPIO
import time
import smtplib
from email.mime.text import MIMEText# Set up GPIO pin for battery capacity measurement
GPIO.setmode(GPIO.BCM)
GPIO.setup(17, GPIO.IN, pull_up_down=GPIO.PUD_UP)# Set up email notification
SMTP_SERVER = "smtp.gmail.com"
SMTP_PORT = 587
FROM_EMAIL = "your_email@gmail.com"
PASSWORD = "your_password"def send_notification(subject, message):
msg = MIMEText(message)
msg['Subject'] = subject
msg['From'] = FROM_EMAIL
msg['To'] = FROM_EMAILserver = smtplib.SMTP(SMTP_SERVER, SMTP_PORT)
server.starttls()
server.login(FROM_EMAIL, PASSWORD)
server.sendmail(FROM_EMAIL, FROM_EMAIL, msg.as_string())
server.quit()while True:
# Read battery capacity from GPIO pin
capacity = GPIO.input(17)
if capacity < 20: # 20% capacity threshold
send_notification("Low Battery Alert", "Battery capacity is low!")
time.sleep(60) # Check every 1 minute
```Example 3: C++ Code for Battery-Operated IoT Device with Power ManagementThis example demonstrates how to use the battery to power an IoT device with power management features, such as low-power mode and automatic shutdown.```cpp
#include <WiFi.h>
#include <Arduino.h>#define LOW_BATTERY_VOLTAGE 10.5 // Low battery voltage threshold
#define SLEEP_INTERVAL 300000 // 5 minutes in millisecondsWiFiClient client;void setup() {
Serial.begin(115200);
pinMode(LED_BUILTIN, OUTPUT); // Initialize built-in LED// Initialize WiFi connection
WiFi.begin("your_wifi_ssid", "your_wifi_password");
while (WiFi.status() != WL_CONNECTED) {
delay(1000);
Serial.println("Connecting to WiFi...");
}
Serial.println("Connected to WiFi");
Serial.println("Initializing IoT device...");
}void loop() {
float batteryVoltage = getBatteryVoltage(); // Get current battery voltageif (batteryVoltage < LOW_BATTERY_VOLTAGE) {
Serial.println("Low battery voltage detected!");
delay(1000);
Serial.println("Entering low power mode...");
lowPowerMode(); // Enter low power mode
} else {
// Normal operation
client.setServer("your_iot_server.com", 80);
client.println("GET /iot_data HTTP/1.1");
client.println("Host: your_iot_server.com");
client.println("Connection: close");
client.println();
delay(1000);
}delay(SLEEP_INTERVAL); // Sleep for 5 minutes
}float getBatteryVoltage() {
// Read battery voltage from ADC pin
int sensorValue = analogRead(A0);
float batteryVoltage = sensorValue 0.011;
return batteryVoltage;
}void lowPowerMode() {
WiFi.disconnect(); // Disconnect from WiFi
client.stop(); // Stop client
digitalWrite(LED_BUILTIN, LOW); // Turn off built-in LED
delay(1000);
Serial.println("Entering deep sleep mode...");
ESP.deepSleep(SLEEP_INTERVAL); // Enter deep sleep mode
}
```These examples demonstrate how to use the 11.1v 5200mah 35C 3S1P Bonka Lipo Battery in various IoT projects, including battery voltage monitoring, capacity monitoring, and power management. Always follow proper safety precautions and charging guidelines when working with LiPo batteries.