Witty Fox 11.1V 4400mAh Li-Ion Battery
Witty Fox 11.1V 4400mAh Li-Ion Battery
The Witty Fox 11.1V 4400mAh Li-Ion Battery is a high-performance rechargeable lithium-ion battery designed for use in a wide range of IoT devices, robotics, and portable electronics. This battery offers a reliable and efficient power source, making it an ideal choice for demanding applications.
The Witty Fox 11.1V 4400mAh Li-Ion Battery is designed to provide a stable and consistent power supply to devices, ensuring uninterrupted operation and efficient energy storage. The battery's lithium-ion chemistry allows for high energy density, long cycle life, and low self-discharge rates.
| The Witty Fox 11.1V 4400mAh Li-Ion Battery is suitable for a wide range of IoT devices, including |
Robotics and robotic platforms
Portable electronic devices (e.g., handsets, tablets, and laptops)
Wireless sensor networks and IoT gateways
Medical devices and wearables
Industrial control systems and automation equipment
| To ensure optimal performance, safety, and lifespan, it is recommended to |
Follow proper charging and discharging procedures.
Avoid extreme temperatures, high humidity, and physical damage.
Monitor battery health and state-of-charge using built-in protection circuits or external monitoring systems.
Store the battery in a cool, dry place when not in use, away from metal objects and flammable materials.
By following these guidelines and recommendations, the Witty Fox 11.1V 4400mAh Li-Ion Battery can provide reliable and efficient power for your IoT devices and applications.
Witty Fox 11.1V 4400mAh Li-Ion Battery DocumentationOverviewThe Witty Fox 11.1V 4400mAh Li-Ion Battery is a high-capacity rechargeable battery designed for use in various IoT applications, including robotics, drones, and other battery-powered devices. This battery features a high energy density, long cycle life, and low self-discharge rate, making it an ideal choice for demanding applications.SpecificationsNominal Voltage: 11.1V
Capacity: 4400mAh
Type: Lithium-Ion (Li-Ion)
Dimensions: 120mm x 60mm x 30mm
Weight: 250g
Discharge Rate: 1C (4.4A)
Cycle Life: 300 cyclesConnections and PinoutsThe Witty Fox 11.1V 4400mAh Li-Ion Battery has the following connections:Positive Terminal (Red Wire): 11.1V output
Negative Terminal (Black Wire): Ground
Balance Connector (3-pin header): for charging and balancing individual cellsCode ExamplesHere are a few examples of how to use the Witty Fox 11.1V 4400mAh Li-Ion Battery in various contexts:Example 1: Arduino Robot using Witty Fox BatteryIn this example, we'll use the Witty Fox battery to power an Arduino-based robot that drives two DC motors.```c
// Define motor pins
const int leftMotorForward = 2;
const int leftMotorBackward = 3;
const int rightMotorForward = 4;
const int rightMotorBackward = 5;void setup() {
// Initialize motor pins as outputs
pinMode(leftMotorForward, OUTPUT);
pinMode(leftMotorBackward, OUTPUT);
pinMode(rightMotorForward, OUTPUT);
pinMode(rightMotorBackward, OUTPUT);
}void loop() {
// Drive motors forward
digitalWrite(leftMotorForward, HIGH);
digitalWrite(rightMotorForward, HIGH);
delay(1000);
// Drive motors backward
digitalWrite(leftMotorBackward, HIGH);
digitalWrite(rightMotorBackward, HIGH);
delay(1000);
}
```Power the Arduino board and motors using the Witty Fox battery. Connect the positive terminal (red wire) to the Arduino's VIN pin and the negative terminal (black wire) to the Arduino's GND pin.Example 2: ESP32 Board with Witty Fox Battery and Solar ChargerIn this example, we'll use the Witty Fox battery to power an ESP32 board and charge it using a solar panel.```c
// Define solar charger pin
const int solarChargerPin = 32;void setup() {
// Initialize solar charger pin as an input
pinMode(solarChargerPin, INPUT);
}void loop() {
// Check if solar charger is providing power
if (digitalRead(solarChargerPin) == HIGH) {
// Charge the Witty Fox battery using the solar panel
// (note: additional circuitry and charging IC required)
}
// Use the ESP32 board as usual
// (e.g., connect to Wi-Fi, read sensor data, etc.)
}
```Connect the solar panel to the solar charger IC, which is connected to the Witty Fox battery's balance connector (3-pin header). Use the ESP32 board's built-in voltage regulator to power the board from the Witty Fox battery.Note: These examples are simplified and may require additional circuitry, components, and code to function properly. Always follow proper safety precautions and guidelines when working with batteries and electrical systems.