STM32F030F4P6 Development Board
STM32F030F4P6 Development Board
The STM32F030F4P6 Development Board is a microcontroller-based development platform designed for prototyping and evaluating the STM32F030F4P6 microcontroller from STMicroelectronics. This board is ideal for developing a wide range of applications, including IoT, robotics, industrial automation, and more.
| The STM32F030F4P6 is a 32-bit ARM Cortex-M0 microcontroller with a maximum operating frequency of 48 MHz. It features |
16 KB of Flash memory
4 KB of SRAM
256 bytes of EEPROM
1 x UART (Universal Asynchronous Receiver-Transmitter) for serial communication
1 x SPI (Serial Peripheral Interface) for serial communication
1 x I2C (Inter-Integrated Circuit) for serial communication
1 x CAN (Controller Area Network) for automotive and industrial applications
Onboard voltage regulator (3.3V or 5V) for powering the microcontroller and peripherals
Power-on reset (POR) and brown-out reset (BOR) for reliable operation
Internal 8 MHz oscillator
External clock input (HSE) for using an external clock source
Onboard SWD (Serial Wire Debug) interface for programming and debugging
2 x 20-pin expansion headers for connecting peripherals, sensors, or other boards
-40C to 85C
RoHS (Restriction of Hazardous Substances) compliant
Compatible with a wide range of development tools and software, including Keil Vision, IAR EWARM, and STM32CubeMX
| The STM32F030F4P6 Development Board is suitable for a wide range of applications, including |
IoT devices
Robotics and automation
Industrial control systems
Medical devices
Consumer electronics
Automotive systems
STM32F030F4P6 Microcontroller Datasheet
STM32F030F4P6 Development Board User Manual
STM32F030F4P6 Development Board Schematics
STM32F030F4P6 Microcontroller Application Notes
By providing a comprehensive overview of the STM32F030F4P6 Development Board, this documentation aims to assist developers, engineers, and hobbyists in understanding the capabilities and features of this microcontroller-based development platform.
STM32F030F4P6 Development Board DocumentationOverviewThe STM32F030F4P6 Development Board is a microcontroller board based on the STM32F030F4P6 microcontroller from STMicroelectronics. This board is a popular choice for IoT projects, robotics, and embedded systems development. It features a 32-bit ARM Cortex-M0 processor, 16 KB of flash memory, 4 KB of SRAM, and a range of peripherals such as USB, USART, SPI, I2C, and GPIO.Pinout and PeripheralsThe STM32F030F4P6 Development Board has a 20-pin DIP package, with the following peripherals and pinout:GPIO: PA0-PA15, PB0-PB3, PC0-PC3
USART: USART1 (PA9, PA10)
SPI: SPI1 (PA5, PA6, PA7)
I2C: I2C1 (PB6, PB7)
USB: USB (PA11, PA12)Code ExamplesHere are three code examples that demonstrate how to use the STM32F030F4P6 Development Board in various contexts:Example 1: Blinking an LED using GPIOThis example shows how to use the GPIO peripherals to blink an LED connected to pin PA5.```c
#include "stm32f0xx.h"int main(void)
{
// Initialize GPIOA clock
RCC_AHBENR.GPIOAEN = 1;// Configure PA5 as output
GPIOA_MODER |= GPIO_MODER_MODE5_0;while (1)
{
// Set PA5 high (LED on)
GPIOA_BSRR = GPIO_BSRR_BS5;// Wait for 500ms
for (int i = 0; i < 500000; i++);// Set PA5 low (LED off)
GPIOA_BSRR = GPIO_BSRR_BR5;// Wait for 500ms
for (int i = 0; i < 500000; i++);
}
}
```Example 2: UART Communication using USARTThis example shows how to use the USART peripheral to send and receive data over a serial connection.```c
#include "stm32f0xx.h"int main(void)
{
// Initialize USART1 clock
RCC_APB2ENR_USART1EN = 1;// Configure USART1
USART1_CR1 = USART_CR1_TE | USART_CR1_RE;
USART1_CR2 = USART_CR2_STOP1_BIT;
USART1_BRR = 0x449; // 9600 baud at 48MHz clockwhile (1)
{
// Send data over USART1
USART1_DR = 'H';
while (!(USART1_SR & USART_SR_TXE));// Receive data over USART1
while (!(USART1_SR & USART_SR_RXNE));
char c = USART1_DR;// Process received data
// ...
}
}
```Example 3: I2C Communication with an External SensorThis example shows how to use the I2C peripheral to communicate with an external sensor connected to the I2C bus.```c
#include "stm32f0xx.h"int main(void)
{
// Initialize I2C1 clock
RCC_APB1ENR_I2C1EN = 1;// Configure I2C1
I2C1_CR1 = I2C_CR1_PE;
I2C1_FREQR = 0x00; // 400 kHz clock
I2C1_CCRH = I2C_CCRH_FMPE;// Initialize I2C bus
I2C1_CR1 |= I2C_CR1_START;while (1)
{
// Send I2C address and read data from sensor
I2C1_DR = 0xA0; // sensor address
while (!(I2C1_SR1 & I2C_SR1_SB));
I2C1_DR = 0x01; // register address
while (!(I2C1_SR1 & I2C_SR1_TXE));
char data = I2C1_DR;// Process received data
// ...
}
}
```These examples demonstrate the basic usage of the STM32F030F4P6 Development Board's peripherals and can be used as a starting point for more complex IoT projects.