V6 Volcano Brass Length Extruder Nozzle 1.75mm x 1.2mm
V6 Volcano Brass Length Extruder Nozzle 1.75mm x 1.2mm
3D Printing Extruder Nozzle
The V6 Volcano Brass Length Extruder Nozzle 1.75mm x 1.2mm is a high-performance extruder nozzle designed for 3D printing applications. Its primary function is to extrude melted filament through a small orifice, enabling the creation of complex three-dimensional objects. This nozzle is specifically designed for use with 1.75mm diameter filament and has a larger heatsink and longer nozzle body, making it suitable for printing with high-temperature materials.
Brass
1/4-28
1.2mm
1.75mm
Approximately 30mm
1.75mm
Up to 300C (dependent on hotend and material)
| The V6 Volcano Brass Length Extruder Nozzle 1.75mm x 1.2mm is suitable for a wide range of 3D printing applications, including |
Prototyping
Model making
Production
Hobbyist printing
This nozzle is ideal for users who require high-quality prints with detailed features, high-temperature material compatibility, and efficient heat dissipation.
V6 Volcano Brass Length Extruder Nozzle 1.75mm x 1.2mm DocumentationOverviewThe V6 Volcano Brass Length Extruder Nozzle is a high-performance hotend nozzle designed for 3D printing applications. Its brass construction provides excellent heat conductivity, while the 1.75mm diameter and 1.2mm length make it suitable for a wide range of printing tasks. This nozzle is compatible with the E3D V6 hotend and is optimized for printing with a wide variety of materials.Technical SpecificationsMaterial: Brass
Diameter: 1.75mm
Length: 1.2mm
Thread: M6
Compatibility: E3D V6 hotend
Operating Temperature: Up to 300CCode Examples### Example 1: Marlin Firmware ConfigurationIn this example, we'll show how to configure the V6 Volcano Brass Length Extruder Nozzle using Marlin firmware.```c
// Configuration.h
#define HOTEND0_PWM 2
#define HOTEND0_TEMPSENSOR 0
#define HOTEND0_HEATER 1// Temperature settings
#define TEMP_SENSOR_0 100
#define TEMP_SENSOR_1 100
#define TEMP_SENSOR_BED 100// Hotend settings
#define HOTENDS 1
#define EXTRUDERend 0// Nozzle settings
#define NOZZLE_DIAMETER 1.75
#define NOZZLE_LENGTH 1.2// G-code setting
#define DEFAULT_AXIS_STEPS_PER_UNIT {80, 80, 400, 92.5}
#define DEFAULT_MAX_FEEDRATE {300, 300, 5, 25}void setup() {
// Initialize hotend
hotend_init();
}void loop() {
// Maintain temperature
maintain_temperature();
}
```In this example, we've configured the Marlin firmware to use the V6 Volcano Brass Length Extruder Nozzle with a hotend temperature sensor, heater, and fan. We've also set the nozzle diameter and length, as well as the default axis steps per unit and maximum feedrate.### Example 2: Python Script for Temperature Control (Using PySerial)In this example, we'll show how to control the temperature of the V6 Volcano Brass Length Extruder Nozzle using a Python script and PySerial library.```python
import serial
import time# Open serial connection
ser = serial.Serial('COM3', 115200, timeout=1)# Set temperature to 200C
ser.write(b"M104 S200
")
response = ser.readline().decode().strip()
print(response)# Wait for temperature to reach 200C
while True:
ser.write(b"M105
")
response = ser.readline().decode().strip()
print(response)
if "T:200" in response:
break
time.sleep(0.5)# Print a message when temperature is reached
print("Temperature reached 200C")# Close serial connection
ser.close()
```In this example, we've opened a serial connection to the 3D printer, set the temperature to 200C using the `M104` G-code command, and wait for the temperature to reach 200C using the `M105` G-code command. Once the temperature is reached, we print a message and close the serial connection.Note: Replace `COM3` with the actual serial port of your 3D printer.Wiring and AssemblyPlease refer to the E3D V6 hotend documentation for wiring and assembly instructions.Safety PrecautionsAlways handle the nozzle with care, as it can become extremely hot during operation.
Ensure proper installation and wiring to avoid electrical shock or fire hazards.
Use the nozzle within its recommended operating temperature range to avoid damage or degradation.By following these code examples and technical specifications, you can effectively integrate the V6 Volcano Brass Length Extruder Nozzle into your 3D printing projects.