1m Wire 5V 2A to 9V 1A USB Booster Cable DC5.52.1MM without LED
1m Wire 5V 2A to 9V 1A USB Booster Cable DC5.52.1MM without LED
The 1m Wire 5V 2A to 9V 1A USB Booster Cable DC5.52.1MM without LED is a USB booster cable designed to step up the voltage from 5V to 9V while maintaining a consistent current output of 1A. This cable is ideal for devices that require a higher voltage input to function properly.
The primary function of this booster cable is to amplify the input voltage from 5V to 9V, allowing devices requiring a higher voltage to operate efficiently. The cable takes in 5V input from a power source, such as a USB port, and boosts it to 9V output, making it suitable for devices that require a higher voltage to function.
5V
2A
9V
1A
1 meter
DC5.52.1MM
Standard USB ports
| This booster cable is suitable for a wide range of applications, including |
Powering devices that require a higher voltage input, such as certain types of electronic devices, robotics, and automation systems.
Extending the power output of a USB port to devices that require a higher voltage.
Providing a reliable and efficient power connection for devices with high power requirements.
| To ensure safe and reliable operation, please follow these guidelines |
Use the cable with a power source that can supply a maximum of 2A current.
Do not exceed the recommended input voltage and current ratings.
Avoid overheating, short-circuiting, or exposing the cable to water or moisture.
By following these guidelines and technical specifications, the 1m Wire 5V 2A to 9V 1A USB Booster Cable DC5.52.1MM without LED can provide a reliable and efficient power connection for a variety of devices and applications.
1m Wire 5V 2A to 9V 1A USB Booster Cable DC5.52.1MM without LEDOverviewThe 1m Wire 5V 2A to 9V 1A USB Booster Cable is a DC-DC boost converter cable designed to step up the input voltage from 5V to 9V. This cable is ideal for powering devices that require a higher voltage than what is available from a standard USB port. The cable features a standard USB-A connector on one end and a DC 5.52.1mm barrel connector on the other end.FeaturesInput voltage: 5V, 2A
Output voltage: 9V, 1A
Cable length: 1 meter
USB-A connector
DC 5.52.1mm barrel connector
No LED indicatorTechnical SpecificationsOperating temperature: -20C to 85C
Storage temperature: -40C to 125C
Output ripple: 50mV
Efficiency: 85%Code ExamplesExample 1: Powering an Arduino BoardThe following example demonstrates how to use the 1m Wire 5V 2A to 9V 1A USB Booster Cable to power an Arduino board that requires 9V.```c++
#include <Arduino.h>int ledPin = 13; // Choose a pin for the LEDvoid setup() {
pinMode(ledPin, OUTPUT);
}void loop() {
digitalWrite(ledPin, HIGH); // Turn the LED on
delay(1000);
digitalWrite(ledPin, LOW); // Turn the LED off
delay(1000);
}
```Hardware ConnectionConnect the USB-A end of the booster cable to a 5V USB power source (e.g., a computer USB port).
Connect the DC 5.52.1mm barrel connector end to the Arduino board's power input (VIN and GND pins).Example 2: Powering a Raspberry PiThe following example demonstrates how to use the 1m Wire 5V 2A to 9V 1A USB Booster Cable to power a Raspberry Pi that requires 9V.```python
import RPi.GPIO as GPIO
import timeGPIO.setmode(GPIO.BCM)
GPIO.setup(17, GPIO.OUT)while True:
GPIO.output(17, GPIO.HIGH) # Turn the LED on
time.sleep(1)
GPIO.output(17, GPIO.LOW) # Turn the LED off
time.sleep(1)
```Hardware ConnectionConnect the USB-A end of the booster cable to a 5V USB power source (e.g., a computer USB port).
Connect the DC 5.52.1mm barrel connector end to the Raspberry Pi's power input (PWR_IN and GND pins).Note: In both examples, ensure that the device being powered is compatible with the 9V output voltage and 1A current rating of the booster cable.