Soldron 35W Nickel Plated Spade 3mm Bit - BN35S3 Documentation

Component Description

Soldron 35W Nickel Plated Spade 3mm Bit - BN35S3

Overview

The Soldron 35W Nickel Plated Spade 3mm Bit, model BN35S3, is a high-quality, high-power connector designed for use in various IoT applications, including industrial automation, robotics, and electrical systems. This component is specifically engineered to provide a reliable and secure connection between devices, ensuring efficient power transmission and signal integrity.

Functionality

The BN35S3 is a spade bit connector, designed to mate with a corresponding spade terminal, providing a secure and reliable connection. Its primary function is to establish a high-power electrical connection between two devices, facilitating the flow of power, signals, or data.

Key Features

High-Power Rating: The BN35S3 is rated for 35W of power, making it suitable for high-power IoT applications.
Nickel Plating: The connector features a nickel-plated finish, providing excellent corrosion resistance and reducing the risk of oxidation.
3mm Spade Bit: The connector's 3mm spade bit ensures a secure and reliable connection with compatible terminals.
Reliable Connection: The BN35S3 is designed to provide a reliable connection, even in high-vibration and high-temperature environments.
Easy Installation: The connector features a simple and intuitive design, making installation and mating easy and efficient.
Compact Design: The BN35S3 has a compact design, allowing it to be used in space-constrained IoT applications.

Electrical Characteristics

Voltage Rating

250V AC/DC

Current Rating

15A

Power Rating

35W

Insulation Resistance

>100M

Mechanical Characteristics

Material

Copper alloy with nickel plating

Contact Resistance

<5m

Operating Temperature

-40C to 105C

Vibration Resistance

IEC 60512-2-1

Applications

The Soldron 35W Nickel Plated Spade 3mm Bit - BN35S3 is suitable for use in various IoT applications, including

Industrial automation systems

Robotics and mechatronics

Electrical systems and power distribution

IoT devices and sensors

Smart home and building automation systems

Technical Specifications

Please refer to the datasheet for detailed technical specifications, including dimensions, mechanical drawings, and certification information.

By providing a reliable and secure high-power connection, the Soldron 35W Nickel Plated Spade 3mm Bit - BN35S3 is an ideal component for IoT applications requiring efficient power transmission and signal integrity.

Pin Configuration

Soldron 35W Nickel Plated Spade 3mm Bit - BN35S3 Documentation
Pinout Description:
The Soldron 35W Nickel Plated Spade 3mm Bit - BN35S3 is a high-power relay module designed for IoT and industrial applications. It features a 3mm spade terminal connection and is capable of switching loads up to 35W. The module has a total of 5 pins, which are described below:
Pin 1: VCC
Function: Power supply pin
Description: Connects to the positive terminal of the power supply (usually 5V or 12V)
Connection: Connect a wire to the positive terminal of your power supply (e.g., a battery or a wall adapter)
Pin 2: IN
Function: Input signal pin
Description: Receives the control signal from a microcontroller or other logic devices to switch the relay on or off
Connection: Connect a wire from the output pin of your microcontroller (e.g., GPIO pin on an Arduino board) to this pin
Pin 3: NC (Normally Closed)
Function: Normally Closed contact pin
Description: Connects to the load (device to be controlled) and is normally connected to the COM pin when the relay is in the off state
Connection: Connect a wire from this pin to one terminal of the load (e.g., a lamp or a motor)
Pin 4: COM (Common)
Function: Common contact pin
Description: Connects to the load (device to be controlled) and is the center terminal of the SPDT relay
Connection: Connect a wire from this pin to the other terminal of the load (e.g., a lamp or a motor)
Pin 5: NO (Normally Open)
Function: Normally Open contact pin
Description: Connects to the load (device to be controlled) and is normally disconnected from the COM pin when the relay is in the off state
Connection: Not connected in a typical setup, as it is only used for SPDT relay configurations
Connection Structure:
To connect the Soldron 35W Nickel Plated Spade 3mm Bit - BN35S3 relay module, follow these steps:
1. Connect the VCC pin (Pin 1) to the positive terminal of your power supply.
2. Connect the IN pin (Pin 2) to the output pin of your microcontroller or logic device.
3. Connect the NC pin (Pin 3) to one terminal of the load (e.g., a lamp or a motor).
4. Connect the COM pin (Pin 4) to the other terminal of the load (e.g., a lamp or a motor).
Important:
Make sure to use proper wiring and insulation to prevent electrical shock or short circuits.
Ensure the relay module is securely mounted and heat dissipation is adequate for high-power applications.
Follow the datasheet and technical specifications for the relay module and other components in your project.
By following this pinout description and connection structure, you can effectively use the Soldron 35W Nickel Plated Spade 3mm Bit - BN35S3 relay module in your IoT projects.

Code Examples

Soldron 35W Nickel Plated Spade 3mm Bit - BN35S3 Documentation

Overview

The Soldron 35W Nickel Plated Spade 3mm Bit - BN35S3 is a high-power, nickel-plated spade connector designed for use in a variety of IoT applications, including robotics, automotive, and industrial control systems. This component provides a reliable and secure connection for wires and cables, with a maximum current rating of 35A.

Key Features

Nickel-plated spade connector for corrosion resistance and durability
 3mm pin size for compatibility with standard connectors
 Maximum current rating: 35A
 Operating temperature range: -20C to 105C
 Wire size range: 0.5mm to 2.5mm

Usage Examples

### Example 1: Connecting a Motor to an Arduino Board

In this example, we will demonstrate how to use the Soldron 35W Nickel Plated Spade 3mm Bit - BN35S3 to connect a DC motor to an Arduino board.

Hardware Requirements

Arduino Board (e.g. Arduino Uno)
 DC Motor (e.g. 12V, 1A)
 Soldron 35W Nickel Plated Spade 3mm Bit - BN35S3
 Jumper wires

Code Example (Arduino IDE)
```c
const int motorPin = 9; // PWM pin for motor control

void setup() {
  pinMode(motorPin, OUTPUT);
}

void loop() {
  // Set motor speed to 50% duty cycle
  analogWrite(motorPin, 128);
  delay(1000);
  // Set motor speed to 0% duty cycle (stop motor)
  analogWrite(motorPin, 0);
  delay(1000);
}
```
Connection Diagram

Connect the Soldron 35W Nickel Plated Spade 3mm Bit - BN35S3 to the DC motor leads.
 Connect the other end of the spade connector to the PWM pin (e.g. Pin 9) on the Arduino board using a jumper wire.

### Example 2: Connecting a Sensor to a Raspberry Pi

In this example, we will demonstrate how to use the Soldron 35W Nickel Plated Spade 3mm Bit - BN35S3 to connect a temperature sensor to a Raspberry Pi.

Hardware Requirements

Raspberry Pi (e.g. Raspberry Pi 4)
 Temperature sensor (e.g. DS18B20)
 Soldron 35W Nickel Plated Spade 3mm Bit - BN35S3
 Jumper wires

Code Example (Python)
```python
import RPi.GPIO as GPIO
import time

# Set up GPIO pin for temperature sensor
GPIO.setmode(GPIO.BCM)
GPIO.setup(17, GPIO.IN)  # Pin 17 for temperature sensor

while True:
    # Read temperature sensor data
    temp_data = GPIO.input(17)
    print("Temperature:", temp_data)
    time.sleep(1)
```
Connection Diagram

Connect the Soldron 35W Nickel Plated Spade 3mm Bit - BN35S3 to the temperature sensor leads.
 Connect the other end of the spade connector to a GPIO pin (e.g. Pin 17) on the Raspberry Pi using a jumper wire.

Note: The examples provided are for illustrative purposes only and may require modification to suit specific project requirements. Ensure proper wiring and safety precautions when working with electrical components.

Update Your Location

Saved Addresses