13.56MHz NFC Antenna

Buy Now on Stufin

Component Name

Overview

The 13.56MHz NFC Antenna is a near-field communication (NFC) antenna designed to operate at a frequency of 13.56 MHz, which is a commonly used frequency for NFC applications. This antenna is a critical component in NFC-enabled devices, enabling communication between devices over short distances.

Functionality

The primary function of the 13.56MHz NFC Antenna is to transmit and receive NFC signals between devices. When paired with an NFC controller or microcontroller, the antenna enables the exchange of data, such as text, images, or commands, between devices in close proximity (typically up to 10 cm).

Key Features

Frequency: The antenna operates at a frequency of 13.56 MHz, which is a standard frequency for NFC applications.
NFC Compliance: The antenna is designed to meet NFC Forum specifications, ensuring compatibility with NFC-enabled devices.
High-Efficiency Design: The antenna is optimized for high efficiency, enabling reliable and efficient data transfer.
Compact Size: The antenna is designed to be compact, making it suitable for integration into a wide range of devices, including smartphones, tablets, and wearables.
Robust Construction: The antenna is built to withstand harsh environments and is resistant to mechanical stress and corrosion.
Compatibility: The antenna is compatible with various NFC modes, including reader, writer, and peer-to-peer modes.
Tolerance to Interference: The antenna is designed to operate in environments with high levels of electromagnetic interference (EMI).
Low Power Consumption: The antenna is designed to operate with low power consumption, making it suitable for battery-powered devices.

Technical Specifications

Frequency Range: 13.56 MHz 10 kHz
Impedance: 50
Radiation Pattern: Omnidirectional
Gain: 2 dBi
Polarization: Linear
Operating Temperature: -20C to +85C
Storage Temperature: -40C to +125C

Applications

NFC-enabled smartphones and tablets
Wearable devices, such as smartwatches and fitness trackers
Payment terminals and point-of-sale (POS) systems
IoT devices, such as smart home appliances and industrial sensors
Medical devices, such as health monitors and portable diagnostic equipment

The 13.56MHz NFC Antenna is suitable for a wide range of applications, including

Conclusion

The 13.56MHz NFC Antenna is a reliable and efficient component for NFC-enabled devices. Its compact size, high-efficiency design, and robust construction make it an ideal choice for a wide range of applications.

Pin Configuration

13.56MHz NFC Antenna Documentation
Pinout Description
The 13.56MHz NFC Antenna module has a total of 4 pins, which are used to connect the antenna to a microcontroller or other NFC-enabled devices. Here is a detailed description of each pin:
Pin 1: GND (Ground)
Function: Provides a ground connection for the antenna module
Description: This pin is connected to the ground plane of the circuit board and provides a reference point for the antenna's return path
Connection: Connect to the ground pin of the microcontroller or power supply
Pin 2: VIN (Power Input)
Function: Supplies power to the antenna module
Description: This pin is used to power the antenna module and should be connected to a stable voltage source
Connection: Connect to a 3.3V or 5V power supply, depending on the specific module requirements
Pin 3: ANT (Antenna Signal)
Function: Carries the NFC signal to and from the antenna
Description: This pin is connected to the NFC transceiver's antenna pin and is used to transmit and receive NFC data
Connection: Connect to the antenna pin of the NFC transceiver or microcontroller
Pin 4: NC (Not Connected)
Function: Not connected internally and can be left unconnected
Description: This pin is not connected to any internal component and can be left unconnected or used as a test point
Connection: Leave unconnected or use as a test point for debugging purposes
Connection Structure
To connect the 13.56MHz NFC Antenna module to a microcontroller or NFC-enabled device, follow these steps:
1. Connect Pin 1 (GND) to the ground pin of the microcontroller or power supply
2. Connect Pin 2 (VIN) to a stable 3.3V or 5V power supply
3. Connect Pin 3 (ANT) to the antenna pin of the NFC transceiver or microcontroller
4. Leave Pin 4 (NC) unconnected or use as a test point for debugging purposes
Important Notes
Make sure to handle the NFC antenna module with care to avoid damaging the internal components
Use a stable power supply to ensure reliable operation of the antenna module
Follow proper ESD protection precautions when handling the module to avoid damaging the internal components
Refer to the datasheet of the specific module for specific pinout and connection requirements, as some modules may have variations in pinout or connection requirements.

Code Examples

13.56MHz NFC Antenna Documentation

Overview

The 13.56MHz NFC Antenna is a high-frequency antenna designed for Near Field Communication (NFC) applications. It operates at a frequency of 13.56MHz and is suitable for use in a variety of NFC-enabled devices, including smartphones, tablets, and IoT devices.

Features

Operating frequency: 13.56MHz
 High gain and efficiency for reliable NFC communication
 Compact design for easy integration into small devices
 Compatible with NFC standards: ISO/IEC 14443, FeliCa, and ISO/IEC 18092

Code Examples

### Example 1: NFC Tag Reader using Arduino and 13.56MHz NFC Antenna

This example demonstrates how to use the 13.56MHz NFC Antenna with an Arduino board to read NFC tags.

Hardware Requirements

Arduino Uno or compatible board
 13.56MHz NFC Antenna
 NFC tags (ISO/IEC 14443-3 compliant)

Software Requirements

Arduino IDE (version 1.8 or later)
 NFC library for Arduino (available on GitHub)

Code
```c
#include <NFC.h>

#define ANTENNA_PIN 9  // Pin connected to the 13.56MHz NFC Antenna

NFC nfc = NFC(ANTENNA_PIN);

void setup() {
  Serial.begin(9600);
  nfc.begin();
}

void loop() {
  uint8_t uid[] = { 0, 0, 0, 0, 0, 0, 0 };  // Buffer to store UID
  uint8_t uidLength = 7;

if (nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uidLength)) {
    Serial.print("UID: ");
    for (int i = 0; i < uidLength; i++) {
      Serial.print(uid[i], HEX);
      Serial.print(" ");
    }
    Serial.println();
  } else {
    Serial.println("No NFC tag found.");
  }

delay(500);
}
```
This code initializes the NFC library and reads the UID of an NFC tag when it is brought near the 13.56MHz NFC Antenna. The UID is printed to the serial console.

### Example 2: NFC Payment System using Raspberry Pi and 13.56MHz NFC Antenna

This example demonstrates how to use the 13.56MHz NFC Antenna with a Raspberry Pi to create a simple NFC payment system.

Hardware Requirements

Raspberry Pi 3 or 4
 13.56MHz NFC Antenna
 NFC tags (ISO/IEC 14443-3 compliant)
 Payment terminal or POS system

Software Requirements

Raspbian OS (version 10 or later)
 Python 3.x
 PyNFC library (available on GitHub)

Code
```python
import nfc

# Initialize the NFC device
nfc_device = nfc.Device('pn532_i2c:/dev/i2c-1')

# Set the antenna pin
nfc_device.set_antenna_pin(18)  # Pin connected to the 13.56MHz NFC Antenna

while True:
    # Wait for an NFC tag to be presented
    tag = nfc_device.wait_for_tag()

# Check if the tag is a payment card
    if tag.type == nfc.constants.NFC_TAG_TYPE_ISO14443_4:
        # Read the payment card data
        card_data = tag.ndef_read_records()

# Process the payment
        print("Payment processed: ", card_data)

else:
        print("Invalid tag type.")
```
This code initializes the NFC device and sets the antenna pin. It then waits for an NFC tag to be presented and checks if it is a payment card. If valid, it reads the payment card data and processes the payment.

Note: These code examples are for illustration purposes only and may require modifications to work with specific NFC tags or payment systems.