Arduino IoT Bundle
Arduino IoT Bundle
The Arduino IoT Bundle is a comprehensive starter kit designed to facilitate the development of Internet of Things (IoT) projects. This bundle combines the popular Arduino boards with essential components and tools, enabling users to create innovative IoT solutions with ease.
Temperature and humidity sensors (e.g., DHT11 or BME280)
Motion and gesture sensors (e.g., MPU-6050 or APDS-9960)
Environmental sensors (e.g., air quality or gas sensors)
Relay modules for controlling external devices
| Depends on the specific board included (e.g., Arduino Uno Wi-Fi Rev2 | 32-bit AVR microcontroller, 2.4GHz Wi-Fi, USB interface) |
| Wi-Fi Module | Depends on the specific module included (e.g., ESP-12E: 2.4GHz Wi-Fi, 802.11 b/g/n) |
| Depends on the specific components included (e.g., DHT11 | Temperature and humidity sensor, 2% accuracy) |
| Depends on the specific power supply unit included (e.g., battery holder | 2x AA batteries, 3V to 5V output) |
| To get started with the Arduino IoT Bundle, users can follow these steps |
By following these steps, users can quickly develop innovative IoT solutions with the Arduino IoT Bundle.
Arduino IoT Bundle DocumentationThe Arduino IoT Bundle is a comprehensive kit that combines the popular Arduino board with various modules and sensors, enabling users to create innovative IoT projects. This bundle includes the Arduino Board, Wi-Fi Module, Sensor Modules (e.g., Temperature, Humidity, and Light), and a Breadboard.Technical Specifications:Arduino Board: ATmega328P Microcontroller, 14 digital I/O pins, 6 analog input pins, 16 MHz clock speed
Wi-Fi Module: ESP8266, 802.11 b/g/n, supports Wi-Fi Direct and Soft AP
Sensor Modules:
+ Temperature: DS18B20, 0.5C accuracy, -55C to 125C range
+ Humidity: DHT11, 5% RH accuracy, 20-80% RH range
+ Light: BH1750FVI, 0-65535 lux range
Breadboard: 400 tie-points, suitable for prototyping and developmentCode Examples:These examples demonstrate how to use the Arduino IoT Bundle in various contexts:Example 1: Wi-Fi Connected Temperature MonitoringThis example shows how to connect the Arduino Board to a Wi-Fi network and send temperature data to a remote server using the Wi-Fi Module and Temperature Sensor.```c++
#include <WiFi.h>
#include <DHT.h>// Wi-Fi credentials
const char ssid = "your_wifi_ssid";
const char password = "your_wifi_password";// Temperature sensor pin
#define DHTPIN 2DHT dht(DHTPIN, DHT11);WiFiClient client;void setup() {
Serial.begin(9600);
dht.begin();
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(1000);
Serial.println("Connecting to WiFi...");
}
Serial.println("Connected to WiFi");
Serial.println("Initializing temperature sensor...");
}void loop() {
float tempC = dht.readTemperature();
if (isnan(tempC)) {
Serial.println("Error reading temperature!");
} else {
Serial.print("Temperature: ");
Serial.print(tempC);
Serial.println("C");
client.println("GET /update?temperature=" + String(tempC) + " HTTP/1.1");
client.println("Host: your_remote_server.com");
client.println();
}
delay(10000);
}
```Example 2: IoT-Based Lighting AutomationThis example demonstrates how to use the Light Sensor and Arduino Board to control an LED strip based on ambient lighting conditions.```c++
#include <BH1750.h>// Light sensor pin
#define LIGHT_PIN A0BH1750 lightSensor;void setup() {
Serial.begin(9600);
lightSensor.begin();
pinMode(LED_PIN, OUTPUT);
}void loop() {
uint16_t lux = lightSensor.readLightLevel();
Serial.print("Light Level: ");
Serial.print(lux);
Serial.println(" lux");
if (lux < 100) {
// Dim the LED strip if ambient light is low
analogWrite(LED_PIN, 128);
} else {
// Turn off the LED strip if ambient light is sufficient
analogWrite(LED_PIN, 0);
}
delay(500);
}
```Example 3: Humidity and Temperature Monitoring with Cloud IntegrationThis example shows how to use the Humidity and Temperature Sensors to send data to a cloud-based IoT platform using the Wi-Fi Module.```c++
#include <WiFi.h>
#include <DHT.h>
#include <HTTPClient.h>// Wi-Fi credentials
const char ssid = "your_wifi_ssid";
const char password = "your_wifi_password";// Temperature and humidity sensor pins
#define DHTPIN 2DHT dht(DHTPIN, DHT11);WiFiClient client;
HTTPClient http;void setup() {
Serial.begin(9600);
dht.begin();
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(1000);
Serial.println("Connecting to WiFi...");
}
Serial.println("Connected to WiFi");
Serial.println("Initializing temperature and humidity sensors...");
}void loop() {
float tempC = dht.readTemperature();
float humid = dht.readHumidity();
if (isnan(tempC) || isnan(humid)) {
Serial.println("Error reading temperature or humidity!");
} else {
Serial.print("Temperature: ");
Serial.print(tempC);
Serial.println("C");
Serial.print("Humidity: ");
Serial.print(humid);
Serial.println("%");
http.begin("http://your_cloud_iot_platform.com/update");
http.addHeader("Content-Type", "application/json");
String jsonData = "{""temperature"": " + String(tempC) + ", ""humidity"": " + String(humid) + "}";
http.POST(jsonData);
int httpCode = http.responseStatusCode();
Serial.println("HTTP Response Code: " + String(httpCode));
}
delay(30000);
}
```These examples demonstrate the versatility of the Arduino IoT Bundle and its potential applications in various IoT projects.